Download Sounds / New samples PA 600

maestro1982 · Post by **maestro1982** » Sat May 11, 2013 8:20 am

Hi i'm a new user by Italy, for all wants..
Here 96 new Sounds with some new PCM piano samples for Korg PA600

http://www.fileswap.com/dl/4gSEHvFmEM/

Sounds Include
-Acoustic Pianos, Electric Piano, Guitars , Brass and Saxes ,Vocal ...
Some sounds are taken from PA3X

Fransman · Post by **Fransman** » Sat May 11, 2013 10:00 am

Does any one know if these can be (safely) loaded in PA800 also?

maestro1982 · Post by **maestro1982** » Sat May 11, 2013 10:08 am

Make first a backup and try to load set...
At least you can redo with a restore from your backup..
Sorry for my english..

sridharar · Post by **sridharar** » Mon May 13, 2013 8:38 pm

Hello Maestro

Thanks for the link. I will try to load and check it out.
Since you must be expert in this - was wondering whether you have any guidance for the following -- as I am new to Korg and my PA600 is just about a month old.

a) How do I create Styles and Pads on my Windows7 laptop for PA600
b) I tried to use a Simple Freeware Midi Editor - but that did not work. KOrg manual says it has to have certain format - but does not say what additional information need to be added and its format
c) Along the same lines how to convert a wave file into a Sound for use with PA600.

Thanks in advance

Regards Sri.

Thoraldus · Post by **Thoraldus** » Mon May 13, 2013 10:25 pm

Fransman wrote:Does any one know if these can be (safely) loaded in PA800 also?

They loaded fine on my PA600.

Stykler · Post by **Stykler** » Thu Jan 01, 2015 5:24 am

The file does not exist.

Snorkum · Post by **Snorkum** » Thu Jan 01, 2015 12:02 pm

Thoraldus · Post by **Thoraldus** » Thu Jan 01, 2015 2:52 pm

Here you go folks - Happy New Year! ...

97 Sounds Set <<<Updated Link Aug 29, 2015

ZIP file is 17MB / SET file is 22MB

Suggest you drill down into the SET and load the sounds individually so you can control where they are loaded to. (and not over-write any existing User Sounds)

jijomklm · Post by **jijomklm** » Tue Jan 06, 2015 1:11 pm

The link says Forbidden

can u send it to jmjjpj@gmail.com
Thanks in advance

Thoraldus wrote:Here you go folks - Happy New Year! ...

96 Sounds Set

ZIP file is 17MB / SET file is 22MB

Suggest you drill down into the SET and load the sounds individually so you can control where they are loaded to. (and not over-write any existing User Sounds)

Thoraldus · Post by **Thoraldus** » Tue Jan 06, 2015 1:28 pm

jijomklm wrote:The link says Forbidden

can u send it to jmjjpj@gmail.com
Thanks in advance

Thoraldus wrote:Here you go folks - Happy New Year! ...

96 Sounds Set

ZIP file is 17MB / SET file is 22MB

Suggest you drill down into the SET and load the sounds individually so you can control where they are loaded to. (and not over-write any existing User Sounds)

Yeah, over 100 downloads and not a single acknowledgement here so I pulled it.

Check your PM.

komar751 · Post by **komar751** » Tue Jan 06, 2015 11:24 pm

Thoraldus wrote:Here you go folks - Happy New Year! ...

96 Sounds Set

ZIP file is 17MB / SET file is 22MB

Suggest you drill down into the SET and load the sounds individually so you can control where they are loaded to. (and not over-write any existing User Sounds)

Hello!

Link don't work - can You sent this set to komar751@wp.pl ?

Thank You!

Thoraldus · Post by **Thoraldus** » Wed Jan 07, 2015 12:40 am

komar751 wrote:
Thoraldus wrote:Here you go folks - Happy New Year! ...

96 Sounds Set

ZIP file is 17MB / SET file is 22MB

Suggest you drill down into the SET and load the sounds individually so you can control where they are loaded to. (and not over-write any existing User Sounds)
Hello!

Link don't work - can You sent this set to komar751@wp.pl ?

Thank You!

Try the link again. Your Welcome.

Snorkum · Post by **Snorkum** » Wed Jan 07, 2015 1:50 am

Thank you very much Thoraldus for posting again. I guess I musy have missed it the last time. I will also try them on my PA900. Should work just fine.
Happy New Year

Thoraldus · Post by **Thoraldus** » Wed Jan 07, 2015 2:47 am

Snorkum wrote:Thank you very much Thoraldus for posting again. I guess I musy have missed it the last time. I will also try them on my PA900. Should work just fine.
Happy New Year

My pleasure Snorkum.

komar751 · Post by **komar751** » Wed Jan 07, 2015 11:58 am

@Thoraldus - You Are Great!

Thank You Very Much!