|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
Sharp Site Admin
Joined: 02 Jan 2002 Posts: 18197 Location: Ireland
|
Posted: Mon Sep 11, 2006 5:59 pm Post subject: |
|
|
Hello.
Quote: | All in all, is it correct that there are 110 Multisamples (000 to 109) in total? |
Sorry, I’m not in the Studio right now so I’m not sure.
Sounds about right. Basically you just needed to load the first set, then append the second set to memory. If you did that, then you have loaded the data perfectly.
Quote: | 007 : Digital Guitar 2 DF001: C5 note, dull click towards the end of the sample. More prominent beat effect if you press a two or more notes at the same time C5 & E5 |
Ok, I’ll check that out.
There maybe an incomparability issue to do with the start loop point. It might be off by one sample to the left. This is something I’ve seen before, but since this is my first time making samples for the OASYS. I may not have allowed for this. Especially since I don’t even have an OASYS, I can’t check my work.
Either way, don’t worry about it. This is all something I can fix from my end even after you all have finished working on the sounds. So just ignore the noise and keep working with the samples as they are. It’s not a problem right now.
Quote: | 81 : Famous Flute : Metallic tick noise towards the end of the sample, audio beats due to looping? |
This is a very rare sample with limited range. It’s an emulation of the famous sound Enigma used in all their sounds. It’s not meant to be played out side the range Enigma played it. So… there’s nothing that can be done here. The sample will sound off when played far from it’s original note.
Quote: | 009 : XL Synth Bass 1 : Audible beat noise when playing C2 note. |
Ok, I’ll check it out. If it’s the loop point issue I mentioned above, then there should be a few other samples that suffer from the same problem. Again, it’s not an issue. Just work away with it as it is and I’ll fix it later.
Quote: | 32 : Kit_10 : Is this from another keyboard/instrument. |
No, it’s from the CD Pool I stated a few years back. Its origin is a free AKAI FTP server that used to be alive a few years back, but is now dead.
Quote: | 079 : X-Files .. any similarities to the soundtrack from the TV series? |
It sounds like the lead sound used in the X-Files theme, but it’s not the same. It’s an original sample I made.
Quote: | 106 to 109 : 64mb Piano FF MF : Is this the Gunther's original piano sample for the K2000, reformatted for the OASYS. 'Cos I did this already once for the Triton and that was also a 64MB Piano sampled at two velocities. |
No, it’s originally part of a 4 layer 256MB Piano that was also on the AKAI FTP server I mentioned above.
Kind Regards.
Sharp. |
|
Back to top |
|
|
Arend Groot Full Member
Joined: 23 Dec 2005 Posts: 193
|
Posted: Mon Sep 11, 2006 8:14 pm Post subject: |
|
|
Sharp wrote: | Hello.
Quote: | All in all, is it correct that there are 110 Multisamples (000 to 109) in total? |
Sorry, I’m not in the Studio right now so I’m not sure.
Sounds about right. Basically you just needed to load the first set, then append the second set to memory. If you did that, then you have loaded the data perfectly.
[Sharp. |
Well I have to check it out then because I have 74 multisamples with the piano multisamples from 71 to number 74
Arend |
|
Back to top |
|
|
mozartella Senior Member
Joined: 23 Nov 2003 Posts: 341 Location: Budapest Hungary
|
Posted: Mon Sep 11, 2006 8:23 pm Post subject: error discard please |
|
|
please, discard it _________________ Oasys 76, serial 000800 and Korg PA1 X PRO
Last edited by mozartella on Mon Sep 11, 2006 8:28 pm; edited 1 time in total |
|
Back to top |
|
|
mozartella Senior Member
Joined: 23 Nov 2003 Posts: 341 Location: Budapest Hungary
|
Posted: Mon Sep 11, 2006 8:24 pm Post subject: |
|
|
pranaearth said.....
What is that supposed to mean, mozartella?
Thats alright, I can wait till I buy an Oasys.
Good Luck in your little project, Sharp.
I'll catch the rewards on the other end.
sorry I did not mean to be nasty, just, the answer from Sharp is ok for me that is all....
And, of course when you would have it, ( the Oasys) then you could access to the samples...
Anyway, why put the wagon before the locomotive? time and patience, sometimes are nice _________________ Oasys 76, serial 000800 and Korg PA1 X PRO |
|
Back to top |
|
|
elvisjohndowson Senior Member
Joined: 10 Aug 2006 Posts: 290 Location: Dubai, U.A.E.
|
Posted: Tue Sep 12, 2006 12:58 pm Post subject: |
|
|
mozartella wrote: | why put the wagon before the locomotive? |
On a light note, I kind of vaguely remember that sometimes a locomotive pushes the wagon from behind. Hmmm, now that could probably turn into a different kind of connotation altogether
Elvis Dowson |
|
Back to top |
|
|
mozartella Senior Member
Joined: 23 Nov 2003 Posts: 341 Location: Budapest Hungary
|
Posted: Tue Sep 12, 2006 7:45 pm Post subject: |
|
|
elvisjohndowson wrote: | mozartella wrote: | why put the wagon before the locomotive? |
On a light note, I kind of vaguely remember that sometimes a locomotive pushes the wagon from behind. Hmmm, now that could probably turn into a different kind of connotation altogether
Elvis Dowson |
yes, you are correct, and, sometimes it was more then 3 locomotives, to move the train....
Ok, Elvis, then jump,on board, please, the last stop would be in Dubai... _________________ Oasys 76, serial 000800 and Korg PA1 X PRO |
|
Back to top |
|
|
elvisjohndowson Senior Member
Joined: 10 Aug 2006 Posts: 290 Location: Dubai, U.A.E.
|
Posted: Wed Sep 13, 2006 10:02 am Post subject: |
|
|
Hahah, that's a good one!!
Elvis Dowson |
|
Back to top |
|
|
MIDIManNI
Joined: 26 Feb 2006 Posts: 11 Location: Cookstown, N. Ireland
|
Posted: Wed Sep 13, 2006 11:56 am Post subject: |
|
|
Hi Sharp
Would it be possible to 'climb on board' this interesting project?
I would really appreciate something to get my teeth into....
I have downloaded th file and eagerly await your permission.
I notice a lot of people from the Karma Labs forum here as well, I guess I'll have to hang out here more often now.
Thanks
(Just up the road from you in Cookstown, N. Ireland) _________________ Ivan Flack aka MIDIManNI [OASYS-88 No.000568][2gb RAM][LAC-1][MOD-7]
[ECLECTRIC v1 Sounds] [KARO Granular Atmospheres]
(UK/Ireland)
www.boardgamegeek.com Boardgaming - Another passion of mine! |
|
Back to top |
|
|
bctines Senior Member
Joined: 26 Feb 2005 Posts: 358 Location: In the Pit Bull Parlor, Staghorn Springs, CO
|
Posted: Fri Sep 15, 2006 4:13 am Post subject: |
|
|
Sharp,
Just wanted to let you know I haven't bugged out of this project. I just have lost my OASYS!
Korg's had it in the shop for over a month and they can't fix it 'cuz they don't have the parts. I have absolutely no idea when I'll ever get my hands on it again. Big waste of $9k! |
|
Back to top |
|
|
Derm Senior Member
Joined: 16 Jan 2006 Posts: 276 Location: Dublin
|
Posted: Fri Sep 15, 2006 9:28 am Post subject: |
|
|
I dont know your circumstances BC, or how near you are to the dealer, but if the keyboard is usable at all I would keep it at home. Waiting for parts, in my experience (from anybody) can take a long time, and always appears to be just a week away.
You have my sympathy. _________________ http://www.myspace.com/theparlezmusic
www.photoazure.com |
|
Back to top |
|
|
Arend Groot Full Member
Joined: 23 Dec 2005 Posts: 193
|
Posted: Fri Sep 15, 2006 12:00 pm Post subject: |
|
|
Arend Groot wrote: | Sharp wrote: | Hello.
Quote: | All in all, is it correct that there are 110 Multisamples (000 to 109) in total? |
Sorry, I’m not in the Studio right now so I’m not sure.
Sounds about right. Basically you just needed to load the first set, then append the second set to memory. If you did that, then you have loaded the data perfectly.
[Sharp. |
Well I have to check it out then because I have 74 multisamples with the piano multisamples from 71 to number 74
Arend |
I loaded the 2 files again and now I see the 110 multisamples. I have to reorganize some programs again... |
|
Back to top |
|
|
elvisjohndowson Senior Member
Joined: 10 Aug 2006 Posts: 290 Location: Dubai, U.A.E.
|
Posted: Sat Sep 16, 2006 12:46 am Post subject: Standardize on factory.pcg or producer.pcg |
|
|
Hi Sharp,
I just observed that it is important to standardize on whether you want to use the factory default preload.pcg or producer.pcg when designing combis that use programs from Korg and the OASYS Refill project.
We should take a vote on this and then decide, else there will be addition effort for those working on the project to re-organize their combis. I prefer to use the producer.pcg file. I was working this way, then just thought I'd check the factory demos and reloaded factory.pcg. I decided to keep my OASYS Refill project program and combi patches in User Bank D. When I re-loaded the OASYS Refill project patches, the combi did not work correctly, since it was originally created for the producer settings and not the factory preload settings.
Elvis Dowson |
|
Back to top |
|
|
elvisjohndowson Senior Member
Joined: 10 Aug 2006 Posts: 290 Location: Dubai, U.A.E.
|
Posted: Sat Sep 16, 2006 12:50 am Post subject: Standardize on a user bank |
|
|
Hi Sharp,
While we are on the subject of standardization, I was wondering if we could also decide which user bank all the OASYS Refill project programs and combis will go into.
I use User Bank D for both the programs and combis. I've just made on program and combi, but thought I'd check this out with you before proceeding any further.
Elvis Dowson |
|
Back to top |
|
|
Daz Retired
Joined: 01 Jan 2002 Posts: 10829
|
Posted: Sat Sep 16, 2006 1:00 am Post subject: |
|
|
FYI: User Bank D is going to be used for LAC-1 programs.
Daz. |
|
Back to top |
|
|
StephenKay KARMA Developer Approved Merchant
Joined: 18 Jun 2002 Posts: 2979 Location: Scottsdale, AZ
|
Posted: Sat Sep 16, 2006 1:00 am Post subject: Re: Standardize on a user bank |
|
|
elvisjohndowson wrote: | I use User Bank D for both the programs and combis. I've just made on program and combi, but thought I'd check this out with you before proceeding any further. |
Program User Bank D would not be a good choice, as it contains the LAC-1 option, soon to be out. Furthermore, I would suspect that whatever option comes next will use User C, since that seems to be the way Korg is going. STR-1 = USER E, LAC-1 = USER D, ???? = USER C. Not that I'm involved in this, but I would suggest either User G or User B. Of course, I could be wrong about what they choose next, but I only know that User D is "spoken for". _________________ Stephen Kay - KARMA Developer • Karma-Lab - karma-lab.com
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|