Korg Forums

giovomal · Joined: 14 Jan 2016 Posts: 3

Hi,I need to sequencinq a Korg Electribe sampler 2 (the alternative would be a akai mpx16 with all its faults) as battery module connected to beatstep pro via midi channel 10.
on electribe sampler 16 pads - 16 midi channel, you can not set the same MIDI channel for all pads??
Does anyone have experience of this?
Thank you very much (sorry for my bad english.... Razz

)
Modify message

jbvdb493 · Full Member Joined: 24 May 2015 Posts: 164

I think the easiest would be to set the clock of the electribe to external, slave it to the BSP and then just sequence the electribe internally and use the BSP for other devices you might have!

Poumtschak · Posted: Thu Jan 14, 2016 5:50 pm Post subject:

See the other thread :

HOW-TO: BeatStep Pro Drum Sequencer with KORG Electribe 2
_________________
My electribe2 lousy patterns and stuff | KORG gear: NTS-1, nanoKEY2, electribe2/2S, WS/SR, WS/EX (on storage)

giovomal · Joined: 14 Jan 2016 Posts: 3

thank you
I read the post, it seems the only solution at present.
Fortunately I have not bought Electribe,
When I work out by loading the samples on Blofeld (license sl) and Akai mpx8, so I have all sixteen pads and sequencer bsp on channel 10.
the use of a drum module as Electribe and sample player would certainly be more powerful....look development for a future firmware which allows to set a single channel for all pads.
Sorry for my bad eng... :p

thank you