Korg Forums

Trix5ta · Joined: 21 Jan 2016 Posts: 10

Hello

I am using part 16 of Electribe sampler 2 to sequence my Shruthi on Midi Channel 16.
In order to use more than 1 part from the Shruthi in each Pattern I changed the Midi Channel in the Shruthi to 15 and recorded a new sequence on Part 15.

Afterwards the 2 parts had become linked together , both mute and unmute at the same time and both seem to be set to Channel 15 .
It's impossible to select part 16.
Any idea how this happened and or how to put it back to how it was before?
Thanks.
_________________
Fix da Mix

musicmagus · Approved Merchant Joined: 27 Jul 2015 Posts: 235

Find the E2s setting for "alternate 15-16" and turn it off.
Having alternate 15-16 on is like having those 2 pads on a "choke" group.

apapdop · Posted: Thu Jan 21, 2016 3:45 pm Post subject:

if part 15 has OSC set to Audio In Stereo, this will link it to part 16. Try setting part 15 to OSC Audio In Mono?
_________________
If I'm not listening to music, or if I'm not making music, then I'm probably thinking about music.

Volca Sample, FM, Beats, Kick. OP-1, Monologue, Pocket Operators. And an ipad.

musicmagus · Approved Merchant Joined: 27 Jul 2015 Posts: 235

Yes, that sound more likely.

Trix5ta · Joined: 21 Jan 2016 Posts: 10

Thankyou - Thats exactly what had happened and I also found out how to turn off the choke groups which I was also wondering about.

Nice One Very Happy

_________________
Fix da Mix