| View previous topic :: View next topic |
| Author |
Message |
Jiggins
Joined: 14 Apr 2007
Posts: 42
|
 Posted: Sun Feb 14, 2016 4:10 pm Post subject: New tribes...copy sound between patterns? |
 |
|
Is there no way of copying a sound between patterns? As an experiment I just created 16 nice synth patches in one pattern (no sequencing) and just realized I can't copy them to other patterns!
I cannot find any function in the menu, unless someone has found a way to do it? |
|
| Back to top |
|
 |
Frenzies
Senior Member
Joined: 10 Feb 2015
Posts: 464
|
| Posted: Sun Feb 14, 2016 5:02 pm Post subject: Re: New tribes...copy sound between patterns? |
|
|
| Jiggins wrote: | Is there no way of copying a sound between patterns? As an experiment I just created 16 nice synth patches in one pattern (no sequencing) and just realized I can't copy them to other patterns!
I cannot find any function in the menu, unless someone has found a way to do it? |
Go to the pattern you want to copy to.
Go to the part utility.
Copy part sound.
Select source pattern.
Select source part.
Select destination track.
Done.
If you couldn't find it in the menus I'm not sure which menus you were looking at.
_________________
01/WFD - M3 - MS-20 - Volca Bass - Volca Beats - Volca Keys - electribe emx2 - Monotron - KP3+ - iPad with too many Korg apps
Moog Sub 37 - Arturia Microbrute - Roland Gaia SH-01 - Boss DR660 - Akai S1000 - Akai S01 - Yamaha RM1x - Roland SP-404SX
https://soundcloud.com/beardsound |
|
| Back to top |
|
|
Jiggins
Joined: 14 Apr 2007
Posts: 42
|
| Posted: Sun Feb 14, 2016 5:28 pm Post subject: |
|
|
| When I hit Copy Sound it says Select Destination. There is no option to select a different destination pattern |
|
| Back to top |
|
|
Jiggins
Joined: 14 Apr 2007
Posts: 42
|
| Posted: Sun Feb 14, 2016 5:31 pm Post subject: |
|
|
| Are you talkkng about the ESX or EMX? I know it's possible on those |
|
| Back to top |
|
|
thesigma
Senior Member
Joined: 17 Nov 2011
Posts: 409
|
| Posted: Sun Feb 14, 2016 7:55 pm Post subject: |
|
|
| Jiggins wrote: | | Are you talkkng about the ESX or EMX? I know it's possible on those |
He's talking about the E2' the " I just made 16 nice synth patches in one pattern" is a dead giveaway.
This has been discussed before, do some search, I think it wasn't possible, but I don't own one so can't say for sure.
_________________
Korg gear I own:
electribes EA-1,ER-1,2x ES-1, EMX-1SD, ESX-1SD
DW 8000, Wavestation SR, KP3, Volca Beats, Keys MS 2000 R
Korg gear I've used extensively:
M1, Triton Pro-x 88, SG-1D, NanoPad, NanoKontrol |
|
| Back to top |
|
|
Sebberdii
Joined: 08 Dec 2013
Posts: 30
|
| Posted: Sun Feb 14, 2016 7:59 pm Post subject: |
|
|
It's proberly because you Got an old firmware.
You need to Update your electribe to do it. |
|
| Back to top |
|
|
Jiggins
Joined: 14 Apr 2007
Posts: 42
|
| Posted: Sun Feb 14, 2016 8:20 pm Post subject: |
|
|
| Sebberdii wrote: | It's proberly because you Got an old firmware.
You need to Update your electribe to do it. |
This sounds more like it because I just bought one new. How do you check which version is running? |
|
| Back to top |
|
|
musicmagus
Approved Merchant
Joined: 27 Jul 2015
Posts: 235
|
| Posted: Sun Feb 14, 2016 8:26 pm Post subject: |
|
|
I doubt you need to update your firmware but who knows.
More likely its this:
You need to be in your destination pattern to copy.
It's a 'copy from' type of deal not a 'copy to' thang. |
|
| Back to top |
|
|
Sebberdii
Joined: 08 Dec 2013
Posts: 30
|
| Posted: Sun Feb 14, 2016 8:29 pm Post subject: |
|
|
| On my e2, i needed to Update to copy beween patterns. |
|
| Back to top |
|
|
musicmagus
Approved Merchant
Joined: 27 Jul 2015
Posts: 235
|
| Posted: Sun Feb 14, 2016 8:37 pm Post subject: |
|
|
| Sebberdii wrote: | | On my e2, i needed to Update to copy beween patterns. |
That's cool, I have the sampler version, never updated. still on v 1.05. Everything works fine over here.
I did want to point out that he was trying the procedure in a backwards way, so it wouldn't work like that on any OS version. |
|
| Back to top |
|
|
Jiggins
Joined: 14 Apr 2007
Posts: 42
|
| Posted: Sun Feb 14, 2016 8:44 pm Post subject: |
|
|
| musicmagus wrote: | | Sebberdii wrote: | | On my e2, i needed to Update to copy beween patterns. |
That's cool, I have the sampler version, never updated. still on v 1.05. Everything works fine over here.
I did want to point out that he was trying the procedure in a backwards way, so it wouldn't work like that on any OS version. |
What backwards way? The function is simply not there on mine. It asks if you want to Copy Sound, you hit enter and then it says select destination with no way to switch patterns.
I'm not sure which version I'm running. I will do a search on how to check current version running if know one knows on here |
|
| Back to top |
|
|
Sebberdii
Joined: 08 Dec 2013
Posts: 30
|
| Posted: Sun Feb 14, 2016 9:08 pm Post subject: |
|
|
On my electribe sampler it's no problem to copy Sounds between patterns, but on the synth version it was, before the Update.
Think it's because the synth came out before the sampler, and they fixed it in the samplers firmware.
You are proberly on the first firmware version. |
|
| Back to top |
|
|
musicmagus
Approved Merchant
Joined: 27 Jul 2015
Posts: 235
|
| Posted: Sun Feb 14, 2016 9:39 pm Post subject: |
|
|
| Jiggins wrote: | | musicmagus wrote: | | Sebberdii wrote: | | On my e2, i needed to Update to copy beween patterns. |
That's cool, I have the sampler version, never updated. still on v 1.05. Everything works fine over here.
I did want to point out that he was trying the procedure in a backwards way, so it wouldn't work like that on any OS version. |
What backwards way? The function is simply not there on mine. It asks if you want to Copy Sound, you hit enter and then it says select destination with no way to switch patterns.
I'm not sure which version I'm running. I will do a search on how to check current version running if know one knows on here |
You need to initiate the update firmware sequence (not at my machine now) to see the version number. And if you don't want to update you can back out there.
Is it called copy sound or copy part on the synth version? |
|
| Back to top |
|
|
Frenzies
Senior Member
Joined: 10 Feb 2015
Posts: 464
|
| Posted: Sun Feb 14, 2016 10:02 pm Post subject: |
|
|
It's copy part sound.
I don't think it was there on 1.03, but came in with 1.10
_________________
01/WFD - M3 - MS-20 - Volca Bass - Volca Beats - Volca Keys - electribe emx2 - Monotron - KP3+ - iPad with too many Korg apps
Moog Sub 37 - Arturia Microbrute - Roland Gaia SH-01 - Boss DR660 - Akai S1000 - Akai S01 - Yamaha RM1x - Roland SP-404SX
https://soundcloud.com/beardsound |
|
| Back to top |
|
|
1_inch_punch
Senior Member
Joined: 03 Sep 2012
Posts: 314
|
| Posted: Sun Feb 14, 2016 10:25 pm Post subject: |
|
|
its the same as copying a Part - you begin by being in the Pattern you wish to copy TO -
That way you only need select a Pattern once. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
