Korg Forums

[losackmd2]

I've asked this before

should i use the SMF export method to do this?

is there any other way to save the PA3x STYLES to the PA4X

or should i do it via MIDI FILES

thanks for putting up with me

[karmathanever]

HI Glenn

No - not MIDI files - much easier way....
...sent you lots of detail in PM

Cheers

Pete
_________________
PA4X-76, Karma, WaveDrum GE, Fantom 8 EX
------------------------------------------------------------------
## Please stay safe ##
...and play lots of music
------------------------------------------------------------------

[tonylawton]

Hi
Would it be possible to tell me also how to get factory styles off the PA3X onto the PA4x. I have kept both keyboards and there a re a few styles missing off the Pa3x that I would like on the PA4x.

Many thank

Tony

[karmathanever]

Unprotect factory styles in MEDIA mode>>preferences
Save a new SET:-
Open SSD (i.e. select "All" and "OPEN")
Open STYLES
You will see ALL the style banks BANK01-15, FAVORITES01-15, USER01-.... etc
You can save each bank at a time to the same SET and then you'll have all the factory styles saved.
To restore factory BANKS you have to do this a bank at a time by "opening" the SET, then STYLES, then you'll see all the BANKS
Loading the full SET will NOT automatically restore factory banks

Cheers

Pete
_________________
PA4X-76, Karma, WaveDrum GE, Fantom 8 EX
------------------------------------------------------------------
## Please stay safe ##
...and play lots of music
------------------------------------------------------------------

[tonylawton]

Thank you very much Pete & thank you for your prompt reply.

Regards

Tony

[Inzo]

Hello,
Thank you karmathanever
_________________
Pa4x - 76

[karmathanever]

Sorry if my response above was a bit abbreviated - was at work!!!
- please ask if you still have issues.

Cheers

Pete
_________________
PA4X-76, Karma, WaveDrum GE, Fantom 8 EX
------------------------------------------------------------------
## Please stay safe ##
...and play lots of music
------------------------------------------------------------------

[tonylawton]

No that is ok. I worked out the bits that I did not understand.
I now realise that each bank of factory styles has to be added to a set individually and cannot be done by just selecting to 'save' 'style'

Now that I know what I am doing it is quite straightforward.

Thanks again Pete

Cheers

Tony