![Korg Forums Forum Index](templates/subSilver/images/logo_phpBB.gif) |
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
SomeSynthguy
Joined: 18 May 2017 Posts: 10
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
OpAmp Platinum Member
Joined: 07 Jun 2013 Posts: 1174 Location: Brussels, BE
|
Posted: Thu May 18, 2017 8:58 pm Post subject: |
|
|
Hi,
Are you refering the ticking sound?
This is my take...
* for AMP EG: short attack (basically 0), short decay, low sustain, almost no release. This gives one tick when you hit a key.
* set up the arpeggiator, this gives the repeating ticks as long as you hold the note.
* during performance, play with the cutoff frequency of the filter, or set up a virtual patch, something like a sine LFO, modulating the cutoff to automate it.
Have fun _________________ microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
SomeSynthguy
Joined: 18 May 2017 Posts: 10
|
Posted: Fri May 19, 2017 1:37 am Post subject: |
|
|
Thanks man! I'll definitely have a play this afternoon. Appreciate your experience. It aint' easy starting from scratch! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
SomeSynthguy
Joined: 18 May 2017 Posts: 10
|
Posted: Mon May 22, 2017 10:59 am Post subject: |
|
|
Also. Is anyone able to help explain low frequency oscillators 1 & 2? When I use and adjust them nothing seems to happen. I'm pretty unclear how they're supposed to work and why they don't do anything for me
Another thing: why does turning the cutoff (first of five parameters top right pots of the MK) clockwise yield results but there is always no sound if I move it back to the normal position? I then have to quickly change to another preset and back again to reset the patch |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
OpAmp Platinum Member
Joined: 07 Jun 2013 Posts: 1174 Location: Brussels, BE
|
Posted: Tue May 23, 2017 8:07 pm Post subject: |
|
|
Ok, here it goes.
LFO1: it has a hardwired patch to modulate Ctrl1 of Osc1 (except if this one is using the pcm samples). E.g. if the pulse waveform is chosen, Ctrl1 sets the pulsewidth. LFO1 will modulate Ctrl1 an thus the pulsewidth of Osc1. The intensity of the modulation is set via Ctrl2 of Osc1. Refer to the manual to see what Ctrl1 is used for for the different wafeforms of Osc1. Set Ctrl2 to 0 to disable the modulation of Ctrl1 by LFO1.
LFO2: it has a hardwired patch to modulate the pitch of the timbre at the moment you roll up the mod wheel. The intensity of the modulation when you roll up the mod wheel is controlled via the Vibrato Intensity parameter (pitch section). Put it to 0, to avoid that LFO2 modulates the pitch at the moment you roll up the modwheel.
Apart from their default route, both LFOs can also be used as a source for a virtual patch, in order to modulate Pitch, OSC2 Tune, OSC1 Control 1, Noise Level, CutOff, Amp, Pan or LFO2 Frequency.
I'm not sure that I understand the question on cutoff. What do you mean by 'normal position'? Can you elaborate a bit further on the issue? Especially the change to another preset is strange to me. Maybe it is not related, but if the filter is a low pass filter, turning clockwise opens the filter, letting all harmonics through. Turning counter clock wise, closes the filter, cutting all harmonics to, in some cases, no sound anymore. So it might be normal behavior that you're listening to?
Bye. _________________ microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
SomeSynthguy
Joined: 18 May 2017 Posts: 10
|
Posted: Wed May 24, 2017 11:53 am Post subject: |
|
|
That is so, damn complex.. finding it hard to take in to tell you the truth. Thanks for explaining it all, makes a little mire sense. I'll be sure to open this tutorial next time I'm on the MK for a tweak. Hands on paired with that should make more sense to me
Yea, you're probably right about the harmonics, I dare say it's normal behaviour
Another question; there are a few presets that are totally off the wall complex it would seem to me at this point. I'm talking about one in particular that has an actual drum beat while holding a key down. It has kik and snare, along with a cool base tone. In attempt to try and figure out how they achieved this I went through all the settings one by one and changed every preset, without figuring out how they made it because the drums just stayed the same the whole time I was fiddling. The most I was able to change was tempo and eq. How TF did they do this?! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
OpAmp Platinum Member
Joined: 07 Jun 2013 Posts: 1174 Location: Brussels, BE
|
Posted: Thu May 25, 2017 12:17 am Post subject: |
|
|
It takes time... Especially you also need to do some deep menu diving. The manual is of great help. Don't let it disappoint you.
You might also read some tutorials on analog (modular) synths and how they build up a patch. The mK is a virtual analog one, mimicking the real stuff. Of course it will not exactly be the same in terms of configuration and patches, but you'll get the hang of it and become more familiar with the concepts and terminology.
There is also a sound editor (see Korg website) in which you can edit programs and download them to the mK using MIDI (yes, unfortunately an extra hurdle). It gives a bit a better overview of the parameters in a program in one view instead of the 3 digits on the mK itself...
Concerning the drum + bass program. Probably the tweaking had only results on the bass? It is most likely a program configured to use 2 timbres, basically 2 different sounds at once, each having the same synth engine structure and set of parameters (but other values). Probably you were only tweaking the first timbre (bass). Use the timbre select to choose which one you are editing.
Cheers. _________________ microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|