Korg Forums

[Ekko]

Hi -- I have an old space echo that I'd like to set up in an external send and return arrangement (for recording). Is this possible with the Kronos?

[SanderXpander]

Yes.

[Ekko]

Could you please run me through how I would set this up?

[SanderXpander]

Send the appropriate sound/track to an individual output in the IFX/Routing tab. Feed that to the tape delay. Plug the tape delay output into a Kronos input. Set that input as recording source for the track you want the effected signal to be recorded on.

[Ekko]

Thanks!

[QuiRobinez]

it's easy

connect the two seperate outputs to your effect hardware, connect the output of your effect hardware to the inputs of your kronos, whenever you need a sound running through the hardware just select the corresponding bus outputs for those sounds (you can do this globally or in combi or sequence mode). The standard sounds are sent through the L/R and the outputs 1 and 2 through your hardware effects. Don't forget to setup the inputs correctly in the global area, this is explained in the manual with different kind of examples.

[Ekko]

Thanks!