View previous topic :: View next topic |
Author |
Message |
stevenluky
Joined: 04 Aug 2017 Posts: 2
|
Posted: Sat Aug 05, 2017 6:57 am Post subject: KRONOS: Pedal Control of RT Knob 1 (Cutoff) |
|
|
Hello everybody!
I've a problem with my pedal (Roland EV-5) to control the RT Knob 1 for the Cutoff-Filter to increase and reduce the value slowly.
For the moment I can just "switch" between the values 0 and 127. I connected the pedal to the assigning switch and tried it also in the pedal input.
I've tried several settings in Global Mode under Controllers: selecting
RT Knob1, changing midi channels CC#74, CC#82...
But it doesn't work!
Is it maybe the pedal itself??
Thank you for your help!!!
|
|
Back to top |
|
|
exsequor699 Full Member
Joined: 18 Apr 2016 Posts: 132
|
Posted: Sat Aug 05, 2017 8:30 pm Post subject: |
|
|
I use the same pedal. Not sure if you can to this with Global mode. But here is how I do it: put the pedal's knob to "0", in Global Mode: Foot Pedal Assign CC#004, and in the Program you want to modify, go to Filter Tab, then Filter Mod tab and assign CC#004 (If it has two OSC do it with both OSC.) Hope this helps. |
|
Back to top |
|
|
SanderXpander Platinum Member
Joined: 29 Jul 2011 Posts: 7860
|
Posted: Sat Aug 05, 2017 9:25 pm Post subject: |
|
|
You can assign the pedal globally to RT knob 1. But yeah the knob on the pedal must be on zero. |
|
Back to top |
|
|
stevenluky
Joined: 04 Aug 2017 Posts: 2
|
Posted: Sun Aug 06, 2017 7:23 am Post subject: |
|
|
Hello,
It works!!!
I've just set the knob on the pedal to 0. Sometimes the little things are to close to see them:-) and in Global, Pedal to RT Knob 1 like before.
Many, many THANKS to Exsequor and Sander for the quick solution!!!
|
|
Back to top |
|
|
|