Save master tune settings

Discussion relating to the Korg MS2000, MS2000B & microKorg.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
arevach
Posts: 5
Joined: Sat Aug 12, 2017 5:58 pm

Save master tune settings

Post by arevach »

Hi,
My MicroKorg tune is a bit off and i started to tune it via the global settings > Master tune. i got the proper tone and i would like to save it so i wont need to do it again each time i close/open the instrument.
How can i do it?
Thanks a lot,
Assaf
OpAmp
Platinum Member
Posts: 1179
Joined: Fri Jun 07, 2013 10:26 pm
Location: Brussels, BE

Post by OpAmp »

Save the global settings.
Refer to p58 of the mK manual.
* Turn the EDIT SELECT 2 dial to the GLOBAL or MIDI position
* Press the WRITE key. The display will blink "GLB" and the WRITE key LED will blink
* Press the WRITE key once again to save the data (execute the Write operation). The display will indicate "Wrt"
microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G
arevach
Posts: 5
Joined: Sat Aug 12, 2017 5:58 pm

Thanks a lot. It worked!

Post by arevach »

Perfect thanks a lot.. that did the trick
Post Reply

Return to “Korg MS2000 & microKorg”