View previous topic :: View next topic |
Author |
Message |
kemmorris
Joined: 17 Dec 2017 Posts: 12
|
Posted: Sun Dec 24, 2017 4:40 am Post subject: Krome Transpose issues |
|
|
What's the proper way to transpose a song? I can enter a transpose figure in the field in GLOBAL mode (+2, -1, etc.) but when I play a song back it doesn't actually transpose....it plays back in the normal key. What am I doing wrong? |
|
Back to top |
|
|
kemmorris
Joined: 17 Dec 2017 Posts: 12
|
Posted: Tue Dec 26, 2017 9:31 pm Post subject: |
|
|
No suggestions on this? Am I the only one having this issue? Any help is appreciated. tks |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3776
|
Posted: Wed Dec 27, 2017 6:47 pm Post subject: |
|
|
This is holiday season, after all, so there are fewer folks about. Responses to postings are bound to take longer. Also, none of us are paid to do this ;-)
What is the Global MIDI convert position setting? Is it PreMIDI or PostMIDI? |
|
Back to top |
|
|
kemmorris
Joined: 17 Dec 2017 Posts: 12
|
Posted: Thu Dec 28, 2017 12:39 pm Post subject: |
|
|
It's Pre-MIDI |
|
Back to top |
|
|
kemmorris
Joined: 17 Dec 2017 Posts: 12
|
Posted: Thu Dec 28, 2017 12:43 pm Post subject: |
|
|
Also, just so I don't forget.....I can't find a way to adjust the amount of "slide" the joystick creates. I'd like to have it slide the notes far more than the 1 note up or down it currently does. Don't know if the KROME will do that or not. Thanks |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3776
|
Posted: Thu Dec 28, 2017 3:58 pm Post subject: |
|
|
Thanks for the info. The Global MIDI convert position needs to be set to PostMIDI for the Global Transpose setting to have an effect.
As for pitch bend range, this can be done per Program in the Program P2 editing page, under the Pitch tab. There are separate settings, in semitones, for joystick right and left i.e. JS(+X) and JS(-X). In a Combi it is possible to use the pitch bend values set in each Program used in the Combi, or to override them with a different pitch bend range using the Combi P3: Timbre Param, Pitch tabs. Note here that, whilst a Program can use different pitch bend ranges for joystick +X and -X movement (up to +12 and -12 semitones for each), any override setting in a Combi sets the same range for joystick +X and -X movement, although the range is larger (up to +24 and -24 semitones).
The Krome is a complex, and versatile instrument. The Operating Guide and Parameter Guide PDFs are well written and extremely useful resources to keep to hand, to better understand that complexity. The PDF reader search function can be very helpful in locating the necessary info.
.
Last edited by voip on Thu Dec 28, 2017 6:22 pm; edited 4 times in total |
|
Back to top |
|
|
kemmorris
Joined: 17 Dec 2017 Posts: 12
|
Posted: Thu Dec 28, 2017 4:42 pm Post subject: |
|
|
Thank you for all the info, I will go try those things. I have both the KROME manuals, plus a third (limited) manual from a non-Korg source. However these are all printed as opposed to using PDF. I'll take your suggestion of the PDF search function on-line. I've found many things in these manuals but the above items I could not find or the explanations did not seem to work. Thanks again for your help. |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3776
|
Posted: Thu Dec 28, 2017 6:23 pm Post subject: |
|
|
Just made a couple of changes in my previous posting, to make it slightly clearer. |
|
Back to top |
|
|
|