| View previous topic :: View next topic |
| Author |
Message |
peatymasta
Joined: 15 Feb 2018
Posts: 3
|
 Posted: Thu Feb 15, 2018 11:13 pm Post subject: Pitch Shifting Master Effect |
 |
|
Sorry everyone, I'm a bit of a noob-
I'm trying to use the Pitch Bend master effect on my Korg Kross to shift the pitch of an external instrument. It seems to be working, but it's also "doubling up" and playing the original tone along with the shifted one.
I have the external audio routed to 127 on MFX 1, and I put the pitch shift on MFX 1, and the effect is set to 100% wet, so why is the unshifted sound still getting through with the shifted one? |
|
| Back to top |
|
 |
Biggles
Platinum Member
Joined: 31 Aug 2017
Posts: 1006
|
| Posted: Thu Feb 15, 2018 11:48 pm Post subject: |
|
|
Hello and welcome
If you look on page 69 of the manual you will see a diagram.
It shows the default position of line and inputs to be before the Insert and Master FX.
There is a detailing text section following the diagram on adjusting the settings that should help.
_________________
Biggles
Lancashire, UK |
|
| Back to top |
|
|
peatymasta
Joined: 15 Feb 2018
Posts: 3
|
| Posted: Fri Feb 16, 2018 12:09 am Post subject: |
|
|
| Unfortunately, no dice. The signal path says that the external is being routed to the IFX and MFX. All IFX are off, shouldn't that mean nothing goes through them? |
|
| Back to top |
|
|
peatymasta
Joined: 15 Feb 2018
Posts: 3
|
| Posted: Fri Feb 16, 2018 5:15 am Post subject: |
|
|
| solved it! it was actually my global audio setting routing to BUS, I set both too off |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
