Korg Forums

isaacl · Junior Member Joined: 25 Sep 2012 Posts: 50

Have a key that cracked in a PA4X, are there any instructions for opening it, and replacing the key?

And found that Parts is Parts sell the keys here: https://www.guitar-parts.com/catalog/korg-key-pa1xpro-and-pa2xpro
Has anyone gotten these, and know if they work and match?

Thanks!

AntonySharmman · Posted: Fri Mar 16, 2018 3:19 am Post subject:

Yes they match according to photo , I usually order them from here https://syntaur.com/Keys30.php?Key=K58W
You have to dissasemble the whole keyboard and the way to replace them is here https://syntaur.com/DIYdocs/DIY0001.html
If you're not experienced in such stuff you'd better ask your dealer's service to do the job for you !

Hope this helps
_________________
Music Conductor - Sound Engineer & Developer - Automotive SMPS/RF R&D - Electronics Engineer
PaSeries Demos - WavesArt.eu - KorgPa.gr <> Facebook

Keyboards : Steinway-D, Kronos X, Pa5X 76, Pa4X 76, Montage M7 , Roland-XV88, Emu3,Emax II,Synclavier II,Yamaha DX Series, ΟΒ-8V

isaacl · Junior Member Joined: 25 Sep 2012 Posts: 50

Thanks!

Already ordered the key, think I'm going to try replacing it myself, and I have someone who can do it if I run into any trouble.

Just would love to find some info on how to get the keyboard open (which screws, etc) and how to get the keybed out, but otherwise I'll try to figure it out.

Thanks for the help!

isaacl · Junior Member Joined: 25 Sep 2012 Posts: 50

Thanks again for the info, I was able to figure out getting the keybed out without too much effort, it actually comes out without having to remove too many other screws, and the guide you linked to was extremely helpful, just accidentally cracked the tab on another key, so I may have to replace that one too, and the low C key wasn't as easy to play after I replaced it, so I have to re-open it and figure out what happened there, but hoping I should be good...