Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Issue syncing Monologue clock to Native Instruments Maschine

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Analog Synths (General)
View previous topic :: View next topic  
Author Message
jseal777



Joined: 14 Mar 2018
Posts: 1

PostPosted: Wed Mar 14, 2018 12:14 am    Post subject: Issue syncing Monologue clock to Native Instruments Maschine Reply with quote

Hey everybody. I am new to the boards and I have a problem. I am trying to sync the Monologue sequencer tempo to my native instruments maschine tempo. I have my midi cable from the out of the machine to the in of the Korg, Machine is set to send master clock, Korg has all midi on and set to receive midi clock, but nothing is working. I know the cable works and all the ports work because when I plug my Korg into my laptop and use the sound librarian, the volume knob on the machine changes the volume on the korg but i still dont have tempo sync.

does anybody have any clue whats going on? Thanks.
Back to top
View user's profile Send private message
demonp
Senior Member


Joined: 20 Feb 2006
Posts: 415
Location: Hungary

PostPosted: Sun Mar 18, 2018 3:39 pm    Post subject: Reply with quote

Are midi channels set properly? This one is from manual:

Synchronizing the Sequencer
Use the “Clock Source” setting on button 6 in the GLOBAL EDIT mode to set
whether the monologue will be the master (the device controlling the synchronization)
or the slave (the device being controlled) when the Sequencer is
played (“Clock Source”, p. 42).
TIP When synchronizing to an external MIDI device, refer to that device’s
Owner’s manual.
Using the monologue as the master to slave external MIDI devices
Connect the MIDI OUT connector of the monologue to the MIDI IN connector
on your external MIDI device(s).
In the GLOBAL EDIT mode, set the Clock Source of the monologue to “Internal”,
and configure the external MIDI device to receive clock data via MIDI.
The monologue will act as the master, and the tempo that is set using the TEMPO
knob on the monologue will be sent as MIDI timing clock data to operate
the external MIDI device (sequencers, rhythm machines, and so on).
Slaving the monologue clock to an external MIDI device
Connect the MIDI IN connector of the monologue to the MIDI OUT connector
on your external MIDI device.
In the GLOBAL EDIT mode, set the Clock Source of the monologue to “Auto
(MIDI)”, and configure the external MIDI device to transmit MIDI clock data.
The monologue will automatically act as the slave whenever a MIDI timing
clock is received, and will be driven by the tempo of the external MIDI device
(sequencers, rhythm machines, and so on).
TIP Even if you set the Clock Source to “Auto (USB)” or “Auto (MIDI)”,
the monologue will operate in “Internal” MIDI clock mode, unless a
clock is received from an external device.
_________________
Gear: roland Juno-G, korg x5dr, Monologue, e-mu 0404
www.reason.hu
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Analog Synths (General) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group