Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

ES-1 part clearing issues

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Electribe
View previous topic :: View next topic  
Author Message
Z-Dan



Joined: 29 Apr 2020
Posts: 3

PostPosted: Wed Apr 29, 2020 8:57 pm    Post subject: ES-1 part clearing issues Reply with quote

Hi, I’m trying to clear parts on my es-1. The [i]shift-clear part[/i] button (7) works most of the time but there are always a couple of parts that won’t fully clear per pattern. Why is this and what do I do? I’m a total beginner with this machine.

All I want to do is be able to clear the parts on one whole pattern so that I can write the blank to other patterns and free up some space (it’s all my friends old stuff on there currently).

Any tips or solutions would be greatly appreciated.

Thanks!
Back to top
View user's profile Send private message
ChronLogic



Joined: 10 Jun 2020
Posts: 10
Location: LAS vEGAS nv, usa

PostPosted: Wed Jun 17, 2020 6:11 am    Post subject: Re: ES-1 part clearing issues Reply with quote

Z-Dan wrote:
Hi, I’m trying to clear parts on my es-1. The [i]shift-clear part[/i] button (7) works most of the time but there are always a couple of parts that won’t fully clear per pattern. Why is this and what do I do? I’m a total beginner with this machine.

All I want to do is be able to clear the parts on one whole pattern so that I can write the blank to other patterns and free up some space (it’s all my friends old stuff on there currently).

Any tips or solutions would be greatly appreciated.

Thanks!


You should be able to clear each part one at a time. Try also clearing the motion with shift + 6 for each part. If it still has data, then it may be a defect which is not surprising as mine has a few as well. So if all else fails, just go through each pattern and remove the actual notes. Dont forget to cover all the notes in the pattern with the left arrow button.

camwow wrote:
Hi guys, I am an absolute beginner here, I like the music but completely have no idea about making it so I have some dumb questions and would like answers in as simple terms as possible haha! I'm not looking to do too much, just have some fun mucking around at home trying to make some tunes. I am getting a Kaossilator and then looking to get something else to play around with it that isnt too expensive (looking at the ER1/EA1/EM1).

What is the difference between the ER-1, EA-1 and EM-1?

Can I plug a Kaossilator into all of these? What do I need to do so?

What do I need in order to run it through speakers? I have read I can run it through a guitar amp? Is there a way to run it through say a computer subwoofer and speakers? What do I need to do this? If I have an ER-1/EA-1 and Kaossilator can I run them through the same speaker/amp or would I need a seperate one for each?

What is required to record/transfer anything I create onto computer? If the Kaossilator is plugged into the ER1/EA1 will the sounds from that, as well as the sounds from the ER1 be recorded?

Sorry for the bombardment of questions! Just want to know as much as possible before investing some money, thanks all!


I've been working on a video series dedicated to recording and programing your own beats from scratch with the Korg ES-1 mk2 and the Korg EMX-1 as well. Subscribe to my channel for frequent how to videos of "out of the box" music production as well as my music and plenty of free and original samples. Take control of your music production destiny!

https://www.youtube.com/playlist?list=PLM3_qbHVhZVJzqa42gPNlFbhwHGwgUW1d
_________________
https://www.youtube.com/watch?v=3slhuYeXK6Q&t=6s
Back to top
View user's profile Send private message Send e-mail
ChronLogic



Joined: 10 Jun 2020
Posts: 10
Location: LAS vEGAS nv, usa

PostPosted: Wed Jun 17, 2020 6:12 am    Post subject: Re: ES-1 part clearing issues Reply with quote

Z-Dan wrote:
Hi, I’m trying to clear parts on my es-1. The [i]shift-clear part[/i] button (7) works most of the time but there are always a couple of parts that won’t fully clear per pattern. Why is this and what do I do? I’m a total beginner with this machine.

All I want to do is be able to clear the parts on one whole pattern so that I can write the blank to other patterns and free up some space (it’s all my friends old stuff on there currently).

Any tips or solutions would be greatly appreciated.

Thanks!


You should be able to clear each part one at a time. Try also clearing the motion with shift + 6 for each part. If it still has data, then it may be a defect which is not surprising as mine has a few as well. So if all else fails, just go through each pattern and remove the actual notes. Dont forget to cover all the notes in the pattern with the left arrow button.

camwow wrote:
Hi guys, I am an absolute beginner here, I like the music but completely have no idea about making it so I have some dumb questions and would like answers in as simple terms as possible haha! I'm not looking to do too much, just have some fun mucking around at home trying to make some tunes. I am getting a Kaossilator and then looking to get something else to play around with it that isnt too expensive (looking at the ER1/EA1/EM1).

What is the difference between the ER-1, EA-1 and EM-1?

Can I plug a Kaossilator into all of these? What do I need to do so?

What do I need in order to run it through speakers? I have read I can run it through a guitar amp? Is there a way to run it through say a computer subwoofer and speakers? What do I need to do this? If I have an ER-1/EA-1 and Kaossilator can I run them through the same speaker/amp or would I need a seperate one for each?

What is required to record/transfer anything I create onto computer? If the Kaossilator is plugged into the ER1/EA1 will the sounds from that, as well as the sounds from the ER1 be recorded?

Sorry for the bombardment of questions! Just want to know as much as possible before investing some money, thanks all!


I've been working on a video series dedicated to recording and programing your own beats from scratch with the Korg ES-1 mk2 and the Korg EMX-1 as well. Subscribe to my channel for frequent how to videos of "out of the box" music production as well as my music and plenty of free and original samples. Take control of your music production destiny!

https://www.youtube.com/playlist?list=PLM3_qbHVhZVJzqa42gPNlFbhwHGwgUW1d
_________________
https://www.youtube.com/watch?v=3slhuYeXK6Q&t=6s
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Electribe All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group