View previous topic :: View next topic |
Author |
Message |
aldiablo
Joined: 10 Jul 2018 Posts: 2
|
Posted: Tue Jul 10, 2018 8:42 am Post subject: Korg Monologue Sequencer Problems |
|
|
Hi all,
I am new to the Korg forum and have to say you have a great site here!
I have only recently purchased my first synths having been a guitarist for years and having messed around on friends synths many times over the years.
I got a Monologue second hand but only two months old and still under warranty with the original owner. I am however having problems with the sequencer. As far as I can see I am going through the correct process. I am in Load Panel mode. I press record on the sequencer and play a sequence. The notes on the LED screen are not the notes I am playing though and when I finish the sequence and press play it plays a completely different pre programmed sequence.
Also when I press play to preform real time recording it plays this same sequence. It's sometimes in a different key when I am in step recording.
Has anyone else had similar problem or am I doing something wrong?
The previous owner had overwritten the factory patches and I'm not sure if returning to factory settings might help as I'm not sure if he had programmed anything else into it?
I have also noticed that sometimes when I press Play and Shift together to load the panel it plays a sequence rather than load panel.
Is this just a faulty unit?
Thanks |
|
Back to top |
|
|
roblabs Platinum Member
Joined: 25 Sep 2011 Posts: 1396 Location: NYC
|
Posted: Thu Jul 12, 2018 10:13 pm Post subject: |
|
|
Do a factory reset. Possible that the former owner changed the scales on most of the patches. _________________ www.soundcloud.com/rob-labs |
|
Back to top |
|
|
aldiablo
Joined: 10 Jul 2018 Posts: 2
|
Posted: Sun Jul 15, 2018 7:17 am Post subject: |
|
|
Thanks for the advise roblabs. Reset it to factory settings and the sequencer now works fine. It’s actually a pretty fun and easy to use sequencer. |
|
Back to top |
|
|
|