Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Sustain works only for Midi channel #01G?

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Kronos
View previous topic :: View next topic  
Author Message
H.S.Lee
Junior Member


Joined: 21 Sep 2012
Posts: 60
Location: Seoul, Korea

PostPosted: Mon Dec 31, 2018 5:18 am    Post subject: Sustain works only for Midi channel #01G? Reply with quote

I made a combi timbre, and set 2 kinds of midi channels.
It's 01G and 2.

CH# 01G timbre is played by Keyboard,
CH# 2 timbre is played by Pad trigger.

But my sustain pedal works only for 01G timbre.
How can I activate it also to Midi CH#2 (Or any other channels) timbre ?
_________________
Kronos-2 61, Kurzweil PC3A8, DS-1H, EXP-2,
Nanopad 2, NanoKey2,
Roland OctaCapture, Cubase 7.5.
Back to top
View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger
mikelees
Junior Member


Joined: 21 Mar 2012
Posts: 94
Location: Chelmsford, UK

PostPosted: Mon Dec 31, 2018 8:59 am    Post subject: Reply with quote

Hi - control messages like sustain, joystick etc. are only sent on the global channel. In your case, the global channel is set to channel 1, hence the G after the channel number 01G.

To send control messages to another channel, you will need to use Karma. To do this, set up one of the Karma modules so that the input channel is 01G (global channel) and the output channel is 02. Untick both the “run” and “thru” Buttons for that module (so that the Karma engine doesn’t run, and notes aren’t sent from channel 1 to channel 2). Finally, switch on Karma with the Karma On/Off Button on the main panel just under the volume knob. Now control messages should be passed from 01G to 02.

If there are control messages you don’t want to pass e.g. joystick, you can disable these for channel 02 in the MIDI filter menu.
Back to top
View user's profile Send private message Visit poster's website
ronnfigg
Platinum Member


Joined: 26 Mar 2011
Posts: 2141
Location: CA

PostPosted: Tue Jan 01, 2019 5:00 am    Post subject: Reply with quote

mikelees wrote:
Hi - control messages like sustain, joystick etc. are only sent on the global channel. In your case, the global channel is set to channel 1, hence the G after the channel number 01G.

To send control messages to another channel, you will need to use Karma. To do this, set up one of the Karma modules so that the input channel is 01G (global channel) and the output channel is 02. Untick both the “run” and “thru” Buttons for that module (so that the Karma engine doesn’t run, and notes aren’t sent from channel 1 to channel 2). Finally, switch on Karma with the Karma On/Off Button on the main panel just under the volume knob. Now control messages should be passed from 01G to 02.

If there are control messages you don’t want to pass e.g. joystick, you can disable these for channel 02 in the MIDI filter menu.

To clarify- in the MIDI filter menu you are dealing with timbres, not MIDI channels. If MIDI channel 2 happens to be on Timbre 2, so be it. Trying to alleviate a little confusion here.
_________________
"To me the synthesizer was always a source of new sounds that musicians could use to expand the range of possibilities for making music."
Bob Moog
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Kronos All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group