Korg Forums

patpsc · Full Member Joined: 20 Oct 2006 Posts: 167

Hi all,

I’d like to change or edit an existing chord recognition of an existing style but couldn’t figure out how to do it. Please help if you know a way to do it.

Example:
A basic 3 notes A, C and E will trigger chord Am.
I want to change the 3 notes to A, E and A (one octave higher) to trigger chord Am.

Thanks

karmathanever · Platinum Member Joined: 12 Jan 2004 Posts: 10402

Chord recognition is determined by the fingering mode you choose (e.g. "fingered 1"..etc in GLOBAL mode).

In order for the PA4X to play Am it will need the minor-3rd (C) somewhere in that triad. Chord recognition is not configurable.

Cheers

Pete Very Happy

_________________
PA4X-76, Karma, WaveDrum GE, Fantom 8 EX
------------------------------------------------------------------
## Please stay safe ##
...and play lots of music Very Happy

------------------------------------------------------------------

patpsc · Full Member Joined: 20 Oct 2006 Posts: 167

Oh I understand that now. Thanks Pete.

korgpask · Senior Member Joined: 15 Aug 2013 Posts: 351

Can I turn off BASS INVERT when chords are detected?
chord C (G C E) and bass plays G that is wrong and does not sound good.
How to turn it off?
when both C chords and C bass (G C E or E G C)
When C is detected, BASS plays C.

well thank you

Ron · Posted: Mon Feb 25, 2019 12:13 pm Post subject:

Bass Inversion can be turned off. There is a front panel button for this. When off, all notes of the chord are analyzed but the lowest note does not automatically become the root of the chord.

See pages 203, 345 and others regarding chord recognition, bass inversion and locks. E17 Manual.
_________________
Pa4X, KronosX, BIAB, Cakewalk

korgpask · Senior Member Joined: 15 Aug 2013 Posts: 351

I know it. it's in STYLE PLAY. it is OK. this is not a problem. I'm asking when chords are detected from midi file. There is a bad detection chord recognition. How to turn it off? to distinguish by speed does not work correctly. this is also in the guideline. chord detect from midi works only bass inversion. I ask you to disable it? FUNCTION Chord recognition from the Midi file.

Ron · Posted: Mon Feb 25, 2019 1:17 pm Post subject:

Sorry, but I don't understand your question. How are you using the midi file?

Anytime the chord detection is active, regardless of mode, all parameters are in use -- chord recognition mode, bass inversion, split, scanning, etc.

Maybe have a look at the recent thread "importing a CS from BIAB" Some info there on how the 4x stores notes in a chord sequence after chord detection.
_________________
Pa4X, KronosX, BIAB, Cakewalk