|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
darenager Junior Member
Joined: 30 Sep 2013 Posts: 64 Location: UK
|
Posted: Wed Mar 13, 2019 2:05 pm Post subject: Volca modular midi in and out information |
|
|
It has the pads for midi connections on the PCB. You will need to use an optocoupler for midi in.
https://www.instagram.com/p/Bu8ftuqFJYy/?utm_source=ig_share_sheet&igshid=aar6yliy8tm9
Just tested the midi functionality, see IG clip for details.
Here is all the info about midi in and out for volca modular It transmits and recieves on midi channel 1, it supports the following CCs:
Ratio 40, Fold 41, Mod 42, Attack 43, Release 44, Shape 45, Time 46, Cutoff1 47, Cutoff2 48, Amount 49.
Start and clock is also supported, but external start has definite delay, as seen in the clip, it could be a firmware issue as I have not updated mine yet.
Edit: The start lag was resolved, it was the app causing it, it works fine now.
https://www.instagram.com/p/Bu8mdDbl7Um/?utm_source=ig_share_sheet&igshid=1onkj8hdidyay _________________ My Monotribe Only Album
My MonotribeMod blog
Last edited by darenager on Tue Mar 26, 2019 9:54 pm; edited 1 time in total |
|
Back to top |
|
|
ShoNuff Full Member
Joined: 27 Oct 2014 Posts: 221
|
Posted: Sun Mar 17, 2019 9:26 am Post subject: |
|
|
could you elaborate on the octocoupler ? |
|
Back to top |
|
|
darenager Junior Member
Joined: 30 Sep 2013 Posts: 64 Location: UK
|
|
Back to top |
|
|
darenager Junior Member
Joined: 30 Sep 2013 Posts: 64 Location: UK
|
Posted: Wed Mar 27, 2019 4:59 pm Post subject: |
|
|
The sequencer nor the patch panel do not transmit anything, the transport does, and the keyboard transmits notes and the knobs send the cc commands as above. A shame that it doesn’t send cc from patching, would have bern handy to say have stepped random modulating one of the konbs and sending cc but alas not possible. _________________ My Monotribe Only Album
My MonotribeMod blog |
|
Back to top |
|
|
Eamoex
Joined: 07 Aug 2016 Posts: 21
|
Posted: Sun Apr 21, 2019 4:22 pm Post subject: |
|
|
Thanks for the information! Great news!
I don't have any "social media" account so I will not check IG.
Could you elaborate further on the optocoupler? How do you connect it? |
|
Back to top |
|
|
otzcz
Joined: 22 Sep 2019 Posts: 29 Location: Prague
|
Posted: Thu Oct 03, 2019 6:14 pm Post subject: |
|
|
Hi, here is the solution: https://github.com/sensai7/VolcaModularMidi/blob/master/README.md
Eamoex wrote: | Thanks for the information! Great news!
I don't have any "social media" account so I will not check IG.
Could you elaborate further on the optocoupler? How do you connect it? |
I just bought Vmodular, MIDI Tx/Rx inside is nice surprise, I wanted to make midi out for send out sequencer data (bcs it would be funny to control other gear with this pretty unique), but if it does not transmit anything, im not interested, Im rather gonna figure out, how to trasmit CV. But 0.5V/oct seems like a little trouble for control classic 1V/oct gear (Neutron). _________________ Digitakt, ER-1, Volca Beats + Bass + Modular, Neutron, k-2, Microfreak, Liven XFM, Beatstep Pro, Keystep, UC-33e, few FX (Zoom G1four, Razzor DD+DS, EHX Platform+HolyStain, Samson C.com), Mackie 1202 VLZ4, pair of RCF AyraPro6 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|