 |
Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
|
| View previous topic :: View next topic |
| Author |
Message |
sridharar
Full Member
Joined: 29 Apr 2013
Posts: 130
Location: Nashua, NH
|
 Posted: Sat May 19, 2018 6:31 am Post subject: Sequencer Backing Track Recording |
 |
|
I am sort of getting back to trying this with the new 2.1 version.
Thought some of the earlier bugs would have gone away.
But I still see some of the same old issues.
May be I did not get these right in the first place, before and even now.
Process Steps:
Choose Style Mode.
Select a Performance.
So all the Volume, Tempo, Instruments are set to what I want.
Play and check things out.
All is well.
Now Select Sequencer Mode.
Press Record.
Select Backing Track.
On the screen it shows the correct Style/Performance I have selected.
Acc/Chord Tracks are in record mode (Ok. I need it).
But cannot see/get to Acc/Chord Tracks volume settings.
Able to see Kbd/Pad settings and says they are in record mode. (Good).
But only Lower, Upper 1, 2 and 3 are shown.
They are exactly from my Style/Performance. (Good)
But does not show and cannot see/check settings for tracks 5-8 where pads play.
Moving on...
Press Player Start to Start recording.
Press Start/Stop to Play Style.
The volume of Acc/Chords are now too loud.
Unrelated to Volumes set in the Style/Performance.
They drown the melody I am trying to and want to play/record.
The Balance Knob has no effect.
Anyone has any tips for how to get the Acc/Chord settings right?
Or it is the same bug from before.
Thanks Sri. |
|
| Back to top |
|
 |
ronieaz
Joined: 28 Nov 2016
Posts: 8
Location: Mesa, AZ
|
| Posted: Tue Dec 18, 2018 1:35 am Post subject: Acc/Chords are too loud and no adjustment |
|
|
"The volume of Acc/Chords are now too loud.
Unrelated to Volumes set in the Style/Performance.
They drown the melody I am trying to and want to play/record.
The Balance Knob has no effect. "
I have the same situation but I haven't been able to get around it or find out why this happens. I have a PA600.
_________________
PA600; Sibelius; ReasonEssentials; GarageBand; WavePad; Macs; BehringerUMC204; Behringer K450FX amp; MaudioMIDIkeyboard. |
|
| Back to top |
|
|
siebenhirter
Platinum Member
Joined: 13 Oct 2011
Posts: 1103
|
| Posted: Tue Jan 29, 2019 10:31 pm Post subject: Re: Sequencer Backing Track Recording |
|
|
| sridharar wrote: | | .. volume of Acc/Chords are now too loud .. unrelated to Volumes set in the Style/Performance ... |
Can not see any bug in recent or previous OS concerning recording procedures.
If you press RECORD und select BACKING TRACK sequencer is in record mode. Its tracks are using volume of tr1 - 4 for upper/lower, tr 5-8 for pads and tr9 - 16 for style-tracks.
It is ok that you cannot see/get Acc/Chord Tracks volume settings and you also cannot see/check settings for tracks 5-8 where pads play. Only Volumes for Lower, Upper 1, 2 and 3 are shown to be used in realtime.
If you start/stop recording you automatically return to Main Page of sequencer where you can see the real volumes of recording in tr1-8 (press button "Track Select" to see volumes of tr9-16).
Initial volumes of style/performances a converted to song volumes in tracks 1 - 16. Now its yours to set them to reasonable values for your needs.
So you need no separate Balance Knob - simply use volume of sequencer tracks to set values you want and use stop/play/rewind as often as you need to hear what would be best volumes for the tracks.
In case you want to overdub a group simply press RECORD button again to re-enter Record mode again and select groups you want to record again or you want to hear with "play".
Repeat the recording procedure, and press the (PLAY/STOP) button in the PLAYER section to stop recording and return to the main page of the Sequencer mode as often as you want.
And while in the main page of the Sequencer mode, press the (PLAY/STOP) button in the PLAYER section to listen to the recorded Song also as often as you want, as your backing sequence is converted to an ordinary Song that you now can edit or save (as described in Manual).
_________________
kind regards
- siebenhirter, austria - |
|
| Back to top |
|
|
sridharar
Full Member
Joined: 29 Apr 2013
Posts: 130
Location: Nashua, NH
|
| Posted: Fri Apr 05, 2019 6:32 pm Post subject: |
|
|
siebenhirter
Thanks for taking the time write this long note. Sorry I did not see this until today.
Unfortunately I do not see how it solves the issue I am struggling with.
When I start recording a back track, the style track volumes are very very loud that I cannot even hear what I am playing.
I am just looking for a way to adjust the Volumes of tracks 5-16.
This is a serious bug.
I am not able to work around.
I do not know why track volumes 5-16 cannot be adjusted for back track recording. Though the performance setting for the style are already properly set.
Appreciate further elaboration -- as this issue has been a menacing show stopper for recording songs on PA600.
There are so many basic issues [I have posted these issues in this forum] with PA600 and I gave up on calling their technical support after the first two years (i.e 2016). I just see lack of rigor and their part for getting these basic things right.
br Sri.
_________________
Regards Sri.
Shared Area https://tinyurl.com/ybf5ucga
YouTube
https://www.youtube.com/channel/UCeXBbc4qNkdbNPywhopu1iA |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
