Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Korg Minilogue XD sequencer sending data to all instruments

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Analog Synths (General)
View previous topic :: View next topic  
Author Message
Feythur



Joined: 10 May 2019
Posts: 6

PostPosted: Fri May 10, 2019 10:37 pm    Post subject: Korg Minilogue XD sequencer sending data to all instruments Reply with quote

Hi,

So my problem is that the midi data from the sequencer (and keys) is sending to all tracks in Logic Pro x.

Basically if I have a sequence playing (korg xd) on a channel in logic (is is set up using external device, correct audio in and say midi channel 1). I then have a track set up for my rev2, same input method but on say midi channel 2...

The problem is that logic records all the sequence data from the korg xd onto the Rev2 track!! Help, not experienced this before.

I think I need to stop the Xd sending midi to other instruments - but I’m stuck. My rev2 isn’t displaying the same problem.

Cheers

Dan
Back to top
View user's profile Send private message
megamarkd
Senior Member


Joined: 15 Aug 2017
Posts: 487
Location: Australia

PostPosted: Sat May 11, 2019 2:00 am    Post subject: Reply with quote

Check the MIDI channel setting on the XD, make sure you are not in OMNI mode (which will send and receive on all channels).
_________________
Stuff I'm using: Umm right now, this: Ever-growing Dumbmachine: Bastl Instruments, Circuit Abbey, Elby Designs, Expert Sleepers, Blue Lantern, Tiptop Audio, Make Noise, Busy Circuits, Mutable Instruments, Buchla/Topbrillo, 2hp, Metro Modular, Doepfer, Intellijel, Frostwave, Synthrotek, Korg, Arturia, Teenage Engineering, Patchblocks, Waldorf, Cat Full Of Ghosts, Music Thing Modular
Back to top
View user's profile Send private message
Feythur



Joined: 10 May 2019
Posts: 6

PostPosted: Sat May 11, 2019 6:11 am    Post subject: Reply with quote

Where in the menu do I find Omni mode?
Back to top
View user's profile Send private message
LM
Junior Member


Joined: 09 Oct 2017
Posts: 62

PostPosted: Sat May 11, 2019 4:02 pm    Post subject: Reply with quote

Omni Mode only applies to the receiving end by definition, as in ignore channel data and accept all incoming commands, regardless of MIDI channel. In this situation, it would mean that the Rev2 is the one that might be set to Omni mode (receiving in all channels), rather than the XD.
Back to top
View user's profile Send private message
Feythur



Joined: 10 May 2019
Posts: 6

PostPosted: Sun May 12, 2019 8:05 am    Post subject: Reply with quote

Many thanks - this has helped me trouble shoot the problem! Just need to figure out how to implement this in logic. I think logic holds my problem. The Rev2 is set up to only receive on channel 1&2.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Analog Synths (General) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group