Korg Monotribe Syncing problems!

[hallowedbeats]

Hey everyone! I hope you can help me out with this.

So I have an akai xr20 and a korg monotribe, I plugged the akai XR20 aux into the microkorg sync in. When I turn on the monotribe the tempo light turns full orange, I can play the synth, but when i go to play a pattern nothing happens at all.

How can I fix this? I am really eager to make some music but this is setting me back a lot of creative time.

Thank you for all of your potential help

[LM]

What are you sending out from the XR20 Aux Out into the Monotribe Sync In?

In order to sync with other gear, the Monotribe requires a click (or similar sound) in a steady stream of 8th notes coming into the Sync In port. It's also recommended to use a cable with TRS connectors on both ends. And don't forget to press Play on the Monotribe too.

[hallowedbeats]

What are you sending out from the XR20 Aux Out into the Monotribe Sync In?

In order to sync with other gear, the Monotribe requires a click (or similar sound) in a steady stream of 8th notes coming into the Sync In port. It's also recommended to use a cable with TRS connectors on both ends. And don't forget to press Play on the Monotribe too.

A have to use a 3.5mm to quarter inch. I decided to try and plug the output from the drum machine into the sync, It sinks up, but the 8 steps of the mono tribe becomes 1 click of the drum machine. So it is syncing but way too fast!

[LM]

Did you route a click sound through the Aux out? It has to be a very brief, percussive sound, otherwise the Monotribe will get confused (as you may have noticed with the Mix out).

Mine works fine with the click from a DR-110's Accent Trigger Out (as do the Volcas, SQ-1 and Monologue).

[Sonalii1]

Hi!
Hope we having great discussion ahead!





Thank you!