View previous topic :: View next topic |
Author |
Message |
Jannevse
Joined: 22 Aug 2019 Posts: 2
|
Posted: Thu Aug 22, 2019 12:43 am Post subject: How to fix Volca Sample's noise issue? |
|
|
Has anyone figured out how to fix Volca Sample's noise issue? I have lot of noise. Even when the volume is turned down. Noise is coming both from the headphone output and from the speaker (when headphones are not connected).
I opened the unit and tried to see if there are bad soldering or loose wires, but everything seems okay to me.. |
|
Back to top |
|
|
TheDoctor Full Member
Joined: 28 Mar 2019 Posts: 162
|
Posted: Thu Aug 22, 2019 6:15 pm Post subject: |
|
|
Have you try other cable? I had few midi cable with hiss problem. Also unplug any electric device in your studio and see what happens. A bit of noise from hardware is normal and I actually like more than a "dead" DAW sound. |
|
Back to top |
|
|
ShoNuff Full Member
Joined: 27 Oct 2014 Posts: 221
|
Posted: Sat Aug 31, 2019 5:49 pm Post subject: |
|
|
remember that it's a stereo output.
depending on what type of input you are going into: mono, stereo, un/balanced, you might get variable results, especially if you're using mono.
or maybe it is faulty if it's excessive.
but there is a bit of hiss on mine. not bad if you crank it up. |
|
Back to top |
|
|
|