View previous topic :: View next topic |
Author |
Message |
Charlievv
Joined: 24 Oct 2013 Posts: 48
|
Posted: Thu Oct 07, 2021 7:28 pm Post subject: Sequencer Crashing |
|
|
Every time I try to do a sequence the Kronos hard crashes. Completely non responsive. I have the latest OS on the Kronos. I initialized a new song. Hit record. Record a few notes. And then hit stop.
Kronos is dead.
Anyone can offer any advice on this I would much appreciate it.
Thank you |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3777
|
Posted: Thu Oct 07, 2021 8:57 pm Post subject: |
|
|
If there are any other devices connected to the Kronos, disconnect them and try again. Just leave headphones connected.
One possibility is there is a software corruption issue. It might be worth reinstalling the update.
. |
|
Back to top |
|
|
Charlievv
Joined: 24 Oct 2013 Posts: 48
|
Posted: Thu Oct 07, 2021 10:08 pm Post subject: Sequencer Crashing |
|
|
I idid the disconnect and same issue. It was operating completely alone. Also, I have continued testing and it seems that it happens consistently when I use the method of Press Enter and Record to take a combi directly into the sequencer. Crashes every time in that approach.
If I go to the sequencer and use the copy from combi command it does not crash.
Also, I did reinstall the OS ... 2x . Did not help.
I am not connected to anything via USB and I had the same issue with both midi cables removed. |
|
Back to top |
|
|
Charlievv
Joined: 24 Oct 2013 Posts: 48
|
Posted: Thu Oct 07, 2021 10:28 pm Post subject: Sequencer Crashing |
|
|
Update:
Its crashing Constantly. No matter what method of sequencing is used.
I did notice that if I go to seq. mode, and then call a copy from combi command and bring in a combi, that as soon as it starts recording its not the combi. While in standby mode in the sequencer... the combi is present. |
|
Back to top |
|
|
kronoSphere Platinum Member
Joined: 04 Jan 2012 Posts: 698
|
Posted: Thu Oct 07, 2021 11:09 pm Post subject: |
|
|
Maybe this problem is due to a "bad" PCG file or any other file.
Did you try with an other pcg or sng file ???? _________________ trees are going fast.
https://www.lairdeparis.fr
Current Gear : Kronos 88 / Seaboard Rise / Triton Extreme / Sequoia / Motif Rack XS / TC Helicon voicelive rack /Awave 11 / Audio & VSTi plug-ins connected /wide touchscreen / iPad Pro 512. |
|
Back to top |
|
|
Charlievv
Joined: 24 Oct 2013 Posts: 48
|
Posted: Thu Oct 07, 2021 11:45 pm Post subject: Sequencer Crashing |
|
|
I think I have success.
I reloaded the OS for the 3rd or 4th time and so far its working.
I will post another update if it fails again, but it appears to be back in order.
Thank you all for your help. Very good forum and decent people.
Thanks again. |
|
Back to top |
|
|
Charlievv
Joined: 24 Oct 2013 Posts: 48
|
Posted: Fri Oct 08, 2021 11:28 pm Post subject: Sequencer Crashing |
|
|
Turns out that the last time I updated the OS it worked but then again started crashing.. I did remove a couple of .KSC files from Auto Load and so far this seems to have been the problem. I will reload these file fresh and see what happens but I rarely use them anyway, so likely to just leave well enough alone.
Those files were the issue though. |
|
Back to top |
|
|
|