Korg Forums

bronxvalley · Joined: 29 Aug 2006 Posts: 13

How do I change my i30 Floppy Drive, should I be contacted to the manufacturer for the replacement?
I tried it on eBay but I couldn’t find it, please let me know what is best source to get replace my i30 floppy drive
Thanks
Bronxvalley

tremigius · Joined: 17 Jan 2008 Posts: 4

I have i5s that I bought second hand from some one in Bangalore, India. Before selling to me, he had removed the floppy drive. I would like to know how to fix a new floppy drive in i5s.
_________________
Music is Jeevan: Jeevan is Music.

karmathanever · Platinum Member Joined: 12 Jan 2004 Posts: 10402

Best to ask you local Korg Service rep. I think the diskette drives on the i-series were fairly standard and could be quite easily changed.

All the best

Pete Very Happy

Giner · Posted: Sat Jan 26, 2008 1:39 am Post subject:

Hi bronxvalley. tremigius

This should do the trick for you:

http://www.marshallparts.com/products/202/Disk-Drive.htm

Rsynth · Joined: 27 Jan 2008 Posts: 5 Location: Janesville WI

Hey guys I am working on the entire Korg i series floppy drive issue, these drives are almost all non standard and have a smaller connector cable and Korg is not making parts available.

I currently have drives available for the following i series: i2/i3.

I am working on but almost finished with the: i5m, i5s, and ix300.

I am still working on the following: i4s

I need help/info on these models: i1, i30, i40m, is40, is50 what I need for info is, I need to know what the model and brand of drive is in these units and how many conductors the data cables are going to the drives. If you can help please Email me directly at: Route66studios@aol.com
all of our current Korg drives are available at www.Route66studios.com

Richard at Route 66