Korg Forums

CyberHG · Joined: 22 Oct 2007 Posts: 6

Hi, anyone knows how could i boost the volumen in a combi?

I created a Brass sound that I needed, but the problem is that when I play that combi and then a program like, for example A126 a Tenor Sax, the sax had a good volumen but the brass not. All the tracks in that combi are up to 127 volumen, so...

I also have that same problem with some programs like C022 Trumpet, that sometimes I use as lead, as a really quiet volumen.

Thanks in advance.

P.D. I hope you understandme, soprry for my weird english.

Sharp · Posted: Tue Nov 20, 2007 9:09 pm Post subject:

Try assigning a Compressor to the sound and edit the settings of the compressor to give you more volume.

Regards.
Sharp.
_________________

Hobson · Full Member Joined: 19 Sep 2006 Posts: 120

And if the compressor doesn't do enough or you want to save your efx for something else, you can go to Combi 7.2. On the right side of the screen you will see a master EQ. Crank up the Low, Mid and High and you can get up to 18 db of gain. Balance as necessary for desired EQ.
_________________
Krome 61, M50-61, TR-61, EXB-SMPL w/64MG, Motif Rack-ES, Juno-G, Yamaha S03, Bose L1 Model II; M1, SQ1+

Fatalmasterpiece · Senior Member Joined: 01 Dec 2007 Posts: 256

I believe you also may wish to go to the MIX tab and alter the levels there to make them more to your liking.