View previous topic :: View next topic |
Author |
Message |
Dj Radi
Joined: 28 Dec 2007 Posts: 9
|
Posted: Fri Dec 28, 2007 10:46 am Post subject: Problems with PadK... -This device cannot start. (Code 10) |
|
|
Hi.
I got the padkontrol yesterday!
And installed all the software and everything was done the right way.
But I get this massage @ "device manager" that says:
"This device cannot start. (Code 10)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available."
So I did, and I got the answere that the device is up to date and so one...
The PK showes no light on the dispay and dosn't start at all...
What is the problem and what do I do? :'(
Thanks for any answers and help in advanced!
Last edited by Dj Radi on Tue Jan 01, 2008 6:37 pm; edited 3 times in total |
|
Back to top |
|
|
subVert Full Member
Joined: 21 Dec 2006 Posts: 170 Location: NYC
|
Posted: Fri Dec 28, 2007 7:34 pm Post subject: |
|
|
Just a guess, but do you have the padkontrol plugged into a USB hub? If so, does the hub has it's own power. If the PC seems to be sensing the padkontrol but shows no lights then maybe it's not getting enough power via usb.
Or if you have it plugged in directly, it's possible that your USB port might not be supplying power.
I guess a good test would be to try to borrow a power adapter for it to see if it comes to life. |
|
Back to top |
|
|
Dj Radi
Joined: 28 Dec 2007 Posts: 9
|
Posted: Fri Dec 28, 2007 7:53 pm Post subject: |
|
|
subVert wrote: | Just a guess, but do you have the padkontrol plugged into a USB hub? If so, does the hub has it's own power. If the PC seems to be sensing the padkontrol but shows no lights then maybe it's not getting enough power via usb.
Or if you have it plugged in directly, it's possible that your USB port might not be supplying power.
I guess a good test would be to try to borrow a power adapter for it to see if it comes to life. |
Thanks for answere. I have it plugged right to the PC,
but I have a powred ubs-hub that I can try to connect it to.
(I have VISTA) |
|
Back to top |
|
|
Dj Radi
Joined: 28 Dec 2007 Posts: 9
|
Posted: Tue Jan 01, 2008 4:25 pm Post subject: |
|
|
It worked!
But now I have another problem... :/
It dosn't show up anywere, not in Live or FL, etc..
What is the problem? What do I do? |
|
Back to top |
|
|
subVert Full Member
Joined: 21 Dec 2006 Posts: 170 Location: NYC
|
Posted: Tue Jan 01, 2008 4:57 pm Post subject: |
|
|
Under Live 7 I just added it as a control surface. I can't remember how I did it because I was just following one of the live tutorials when I set it up. |
|
Back to top |
|
|
Dj Radi
Joined: 28 Dec 2007 Posts: 9
|
Posted: Tue Jan 01, 2008 5:15 pm Post subject: |
|
|
It would be nice if anyone could tell me how to do it |
|
Back to top |
|
|
Dj Radi
Joined: 28 Dec 2007 Posts: 9
|
Posted: Tue Jan 01, 2008 6:46 pm Post subject: |
|
|
I still get the same message in "Device Manager".:
"This device cannot start. (Code 10)" ...
As writen in post 1. But now there is light and all that fancy S*** :@
But i want to use it |
|
Back to top |
|
|
|