Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Korg ZERO 4 Startup Problem

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Digital Recording and Mixing
View previous topic :: View next topic  
Author Message
malix



Joined: 16 Mar 2008
Posts: 3

PostPosted: Sun Mar 16, 2008 2:57 pm    Post subject: Korg ZERO 4 Startup Problem Reply with quote

Sometimes when i turn on my Z4 it just freezes, and shows 0 on display.
When i restart it everything works normally.

In some cases sends verry strange noises through channels that are set to firewire audio even if no software is running.
Again restart resolves the problem.

Hope that this new update will resolve this issues.
Must say that i have no noise issues and except this my Zero works great.


Anyone with same problems?
Back to top
View user's profile Send private message
djgorkhali



Joined: 20 Mar 2008
Posts: 12

PostPosted: Thu Mar 20, 2008 3:36 am    Post subject: Reply with quote

nothing will fix any problems with the zero. I think there is a major flaw with this mixer. I am in a hate mood today.

I have to 40 tried upgrading my mixer about 20 to 30 times already and I am getting very frustrated with this upgrade thing.

There are no numbers to call either.
Back to top
View user's profile Send private message
djgorkhali



Joined: 20 Mar 2008
Posts: 12

PostPosted: Mon Mar 24, 2008 10:58 pm    Post subject: Version 1.6 updated Reply with quote

Ok Guy's
This is how I was getting the problem

I tried changing computer's and installed the drivers again.


1. I checked my firmware and downloaded the new one from the internet.
2. I tried using the updater, I followed everything and changed it to
midi in 2 and midi out 2
3. I choose the 1.6.vsb file
4. when I was doing update, halfway through, the screen on KORG would
go dark and I would receive the following error
5. receiving error(timeout)


There was another step that I had missed

THIS WAS THE MAIN PROBLEM.

1. Before powering your Zero, Press and hold "Keep" and "ch 2" below
the display (SYS.U will start blinking). Once this start's blinking than
you would go to the first step on the top.

****You can't update your firmware if SYS.U is not blinking on your screen..



And now Enjoy your Zero4
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Digital Recording and Mixing All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group