Korg Forums

[funkster]

Hi Guys,

I've been searching for a free resource for waveforms to use with my ESX.

I was inspired to find a smooth waveform to mess about with on the ribbon fader by something which you all have prob seen on youtube (http://au.youtube.com/watch?v=bwzTpCGLchs#Qz05v9uJbpc)

Heres the site anyway http://freesound.iua.upf.edu/ (you have to sign up to access sounds tho)

Let me know what you think and if you have any tips on using the ribbon fader as smoothy as him. I aksed him what he was doing, he kindly told me:

"It is a dual sawtooth with filter about halfway, and high resonance, then I am modulating the depth of the envelope and modulation to filter cutoff. For the most part glide is set to about 18, then during the big pitch sweeps I am turning it right up then back down".

[funkster]

Oh and reverse the Ribbon Fader (Global->ArpCntrl->Reverse).

I'm getting there but havent found a sound s smooth as his yet

[funkster]

And push your slider up to the top. All the cool people do that haha

[11hz]

I'm all about freesound. I have a few machinedrum samples in my esx that i got from there.
_________________
.
Music with ESX
.
Music with Gameboys
.

[zalo]

http://www.sampleswap.org/

[funkster]

Thanks Zalo. I'm really looking for long sustained saw's and the like, rather than loops. The Ribbon Fader works well with the filters and effects for lead sounds, but I havent found a tone (e.g sustained dual saw) which works really well yet. Like on the youtube url.

If you know of any places let us know mate.

[funkster]

[Setsonics]

Well you push your slider to the top so you don't get any gate loss, just natural, they are completely different sounds.

When using the arp, try pressing 2 notes down on the step sequencer at the same time. The arp will then repeat the order, you can press down 8 notes and then it will repeat all 8 back in an arp loop, even as you change pitch.
_________________
Youtube
---------
http://www.youtube.com/SinclairSystems
http://www.youtube.com/SirCliveSinclair

SpyMace
----------
http://www.myspace.com/cosmicjetrobot

[funkster]

Sweet tip Setsonics thanks.

Moving the slider down and back up while finger is on the ribbon fader is cool also, as you mention it traverses from gated to full and can sound pretty mad with the right sound.

I'm really getting the hang of the ribbon fader using the EMX. Trying to find a wave for my ESX to get the same effect on the EMX's ribbon fader is very hard. EMX's waves are nice.

Also, sync'ing Mod Speed and adding some depth to the tail of a note sounds sweet. Little warble at the end of nice notes with a bit of glide is pure funk!

[11hz]

You could also make a saw tone you want with a vst synth, and there is a shed load to choose from.
_________________
.
Music with ESX
.
Music with Gameboys
.

[zalo]

you could always sample from the emx

[Setsonics]

and then post them online for us to download



_________________
Youtube
---------
http://www.youtube.com/SinclairSystems
http://www.youtube.com/SirCliveSinclair

SpyMace
----------
http://www.myspace.com/cosmicjetrobot

[funkster]

Setsonic this was in your youtube favorites. Found it so inspirational for banging beats into my ESX! Wot a legend! I'm in tears!

This is ROCK AND ROLL!

http://www.youtube.com/watch?v=dPf0xad3J2w

[Ruso]

get yourself a copy of cakewalk rapture as a demo, it will come with VERY impressive waveforms and a ton of them that you can feed your electribe. You will have to pitch them up I believe two octaves tho so they fit the esx/emx note layout.
_________________


http://myspace.com/audioruso

[funkster]

What site do you guys use to upload files? I sampled some EMX waves for your tweeking pleasure..