View previous topic :: View next topic |
Author |
Message |
analogzzz
Joined: 09 Jun 2008 Posts: 2
|
Posted: Fri Jun 20, 2008 1:23 am Post subject: New Vacuum Tubes!!!! |
|
|
These New Tubes are awesome. I purchased the GT-ECC83's and put them in my SX a couple of days ago. I haven't had any problems with balance at all. I am definitely satisfied with the overall sound. It is true that the EH's don't compliment the potential of this machine. I have way better gain with no static noise, clear glassy like harmonics, and the fun part is tweaking around with the mods to get that tunnel like vacuum effect that was never there before with the EH tubes. I would highly recommend the GT's to anyone who has an SX. Just pull em out and stick em in. Very simple! |
|
Back to top |
|
|
Mateus
Joined: 15 May 2008 Posts: 8 Location: Brazil
|
Posted: Sat Jun 21, 2008 1:58 am Post subject: |
|
|
is there any difference beetwen 'JJ' and 'GT' ECC83-S? |
|
Back to top |
|
|
sKitsOo88
Joined: 27 Feb 2008 Posts: 18 Location: Florida
|
Posted: Tue Jun 24, 2008 10:41 pm Post subject: |
|
|
Has anyone tried anyother "GT" tubes besides the ECC83-S's? If so what kind of difference did it make on the EMX1. Thanks. _________________ What is knowledge without IMAGINATION?
KORG MicroKorg
KORG EMX-1
KORG TR61
PRO TOOLS LE 7.3 |
|
Back to top |
|
|
Willie K Junior Member
Joined: 05 Nov 2006 Posts: 57 Location: Elizabeth,NJ,USA
|
Posted: Mon Jun 30, 2008 6:11 am Post subject: |
|
|
I got the JJ's ECC83 S and put 'em into my ESX and EMX, the sound was improved a lot...now it has more presence,clarity,less distortion with knob up,more "warmer"... I'm more than happy with these tubes. _________________ ESX1,EMX1,KP3. |
|
Back to top |
|
|
Milhouse
Joined: 24 May 2008 Posts: 26
|
Posted: Wed Jul 16, 2008 11:16 pm Post subject: |
|
|
Picked up some GTs!! wooot! |
|
Back to top |
|
|
Milhouse
Joined: 24 May 2008 Posts: 26
|
Posted: Thu Jul 17, 2008 11:19 pm Post subject: |
|
|
Picked up the GT tubes, not as loud as my old tubes but i still have to adjust the balance on them. But the sound is much clearer. _________________ ESX-1
Ensoniq ASR-X Pro
Yamaha TG-33
Juno 106 |
|
Back to top |
|
|
musikmachine Senior Member
Joined: 09 Nov 2006 Posts: 351
|
Posted: Sun Jul 20, 2008 4:21 pm Post subject: |
|
|
Milhouse wrote: | Picked up the GT tubes, not as loud as my old tubes but i still have to adjust the balance on them. But the sound is much clearer. |
They're louder on my SX. I swapped the tubes around and noticed that there was a difference in volume between the EH tubes from my SX and MX. Whereas the MX distorted at low volumes i could turn the tube gain all the way up with the SX tubes in my MX but i didn't like the overall sound, so there is a difference between the EH tubes themselves which could be due to the age of the tubes..
Unless there are differences between the EH tubes themselves.. I've read a few posts saying the upgraded tubes are quieter but in my case they are louder on the SX. Perhaps not as loud as the MX but the old tubes badly distorted around 1/3rd of the way anyway. _________________ Soundz musik |
|
Back to top |
|
|
frosty_sl
Joined: 06 Jun 2008 Posts: 3
|
Posted: Tue Jul 22, 2008 5:21 am Post subject: |
|
|
Sarrova-Q wrote: | Its not really a tube test program.
I used the level meter in Apple Logic to check the balance.
Grtz |
Is there any other way to check the balance of the new tubes, eg. without software? It's just that I don't have Logic on my MacBook..
Btw, thanks for making a simple and useful tutorial! |
|
Back to top |
|
|
Ruso Platinum Member
Joined: 11 Feb 2007 Posts: 984 Location: Sammamish, WA
|
Posted: Tue Jul 22, 2008 6:06 am Post subject: |
|
|
just get a matched pair of tubes... eurotubes charges a couple extra bucks for a set of two matched _________________
http://myspace.com/audioruso |
|
Back to top |
|
|
frosty_sl
Joined: 06 Jun 2008 Posts: 3
|
Posted: Tue Jul 22, 2008 12:22 pm Post subject: |
|
|
Thanks for your reply but I live in Finland so Eurotubes is kind of tricky for me.
The easiest way for me to get real GT ECC83S (not the 9 € JJs) would be through thomann.de. Though I think that they only sell them separately.
Is there much of a probability that separate tubes will be unbalanced? Oh well, I guess the only way to find out is to buy a set and try.. |
|
Back to top |
|
|
MS-DOS
Joined: 23 Mar 2008 Posts: 45
|
Posted: Mon Aug 04, 2008 3:57 pm Post subject: |
|
|
i´ve no time to try these things but thank you very much for the tutorials.
just wanted to say - the photos look like pure magic.
esthetic is absolutely dreamlike.
reminds me of brazil movie fror some reason...
excellent job.
thanks |
|
Back to top |
|
|
Milhouse
Joined: 24 May 2008 Posts: 26
|
Posted: Tue Aug 12, 2008 11:31 pm Post subject: |
|
|
Found out that using balanced 1/4 outs make the ESX sound even better. Gets rid of some of the "noise" when its not playing. _________________ ESX-1
Ensoniq ASR-X Pro
Yamaha TG-33
Juno 106 |
|
Back to top |
|
|
Ruso Platinum Member
Joined: 11 Feb 2007 Posts: 984 Location: Sammamish, WA
|
Posted: Wed Aug 13, 2008 3:00 pm Post subject: |
|
|
I want these in my electribe... wonder what would happen....
_________________
http://myspace.com/audioruso |
|
Back to top |
|
|
Johnwasabi
Joined: 21 Aug 2008 Posts: 1
|
Posted: Thu Aug 21, 2008 1:17 pm Post subject: Balancing Tubes |
|
|
Can I balance the tubes using the pan? |
|
Back to top |
|
|
travisthered Junior Member
Joined: 25 Jun 2008 Posts: 84
|
Posted: Thu Aug 21, 2008 1:42 pm Post subject: Re: Balancing Tubes |
|
|
Johnwasabi wrote: | Can I balance the tubes using the pan? |
sounds tedious. |
|
Back to top |
|
|
|