|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
Re-Member Platinum Member
Joined: 15 Feb 2008 Posts: 657
|
Posted: Sat Aug 20, 2011 4:50 am Post subject: |
|
|
The problem literally just went away for my R3, but I've owned mine for four years now. Grime and dust from many gigs and practices getting into the knob somehow fixed the problem.
But anyway, the temporary solution that worked for me is saving your patch on the desired tempo, switch over to another patch and turn the tempo knob down all the way counter-clockwise, then switch back to the patch you want to play on and DO NOT touch the tempo knob. As long as don't touch the tempo knob, it will be locked in the tempo you saved it at. _________________ Roland Juno-60, SH-101, TR-606, MC-505, Casio CZ-101, Yamaha DX100, DX11, Kawai R-50e // Korg R3, microSTATION, Monotribe, MS-20 Mini, SQ-1, minilogue, electribe sampler, Volca series: Bass, Keys, Beats, Sample, FM, Kick, Moog Theremin |
|
Back to top |
|
|
jonesythetaetoe
Joined: 19 Aug 2011 Posts: 2
|
Posted: Sat Aug 20, 2011 1:35 pm Post subject: |
|
|
Re-Member wrote: | The problem literally just went away for my R3, but I've owned mine for four years now. Grime and dust from many gigs and practices getting into the knob somehow fixed the problem.
But anyway, the temporary solution that worked for me is saving your patch on the desired tempo, switch over to another patch and turn the tempo knob down all the way counter-clockwise, then switch back to the patch you want to play on and DO NOT touch the tempo knob. As long as don't touch the tempo knob, it will be locked in the tempo you saved it at. |
Hi, thanks for the reply. I've sussed the leaving the tempo all the way down thing but if it's an easy repair then I would like to repair it. I've bought the capacitor but not sure where to solder it. I soldered it accross the middle to right hand side pins on the pot (looking at the circuit board from underneath) but it hasn't made any difference. All I managed to achieve was to cause another common fault to arise(noisy outputs, one channel going down itermittently which I traced down to a couple of dry joints) so had to strip the whole thing down to cure that lol. There must be loads of R3s out there with these problems, Any ideas anyone |
|
Back to top |
|
|
hugoguti
Joined: 23 Oct 2011 Posts: 2
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|