|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
BMiles
Joined: 26 Feb 2009 Posts: 1
|
Posted: Thu Feb 26, 2009 1:52 am Post subject: DTR 2000 Tuner - footswitch options |
|
|
I have just purchased a DTR 2000 and would like to be able to use the mute functionn via footswitch and switch between inputs via a footswitch. Rather than using two separate footswitches and 1/4" mono cables, I was wondering if anyone had used a two position footswitch that is hooked up with cable with a stereo 1/4" input into the pedal and with two 1/4' mono outs at the other end that are plugged into the back of the unit? If so, what switch was used?
Thanks |
|
Back to top |
|
|
ebassotti
Joined: 01 Sep 2010 Posts: 5
|
Posted: Wed Sep 01, 2010 1:55 pm Post subject: |
|
|
Given the age of this question the original poster will probably no longer benefit from my reply, but maybe someone else will...
I'm using a Behringer AB200 with my DTR2000. Although this pedal is designed as a dual AB(Y) switch, it works well as 2 separately configurable (latching/non-latching) on-off switches in this application. I'm connecting it using 2 separate mono cables. The stereo cable you have described would work with this pedal, but you would need an additional dual mono to single stereo jack adapter to connect the pedal.
I should mention that the downside of this (otherwise very nice and versatile) footswitch is that it only works with a 9V battery, which is (just a bit) fiddly to replace. I does have nice green and red indicator LEDs for each channel, though |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|