View previous topic :: View next topic |
Author |
Message |
McVicar
Joined: 15 Oct 2009 Posts: 9
|
Posted: Sat Oct 31, 2009 4:45 pm Post subject: USB problems. |
|
|
Downloaded the library software. Connected the microSampler to my computer via USB. My computer found the device. Obviously it didn't work because I forgot about the Korg USB driver.
Found and installed the driver. Nothing happens. Library software can't connect.
How do I fix this?
Thanks in advance.
Best regards
/McVicar |
|
Back to top |
|
|
Themaktima
Joined: 12 Oct 2009 Posts: 7
|
Posted: Sat Oct 31, 2009 9:55 pm Post subject: |
|
|
Are you on Mac or PC? Do you use an external audio interface?
What you can do right away: Try switching the microsampler´s midi mode to USB only (not midi+usb). |
|
Back to top |
|
|
McVicar
Joined: 15 Oct 2009 Posts: 9
|
Posted: Sat Oct 31, 2009 10:11 pm Post subject: |
|
|
Themaktima wrote: | Are you on Mac or PC? Do you use an external audio interface?
What you can do right away: Try switching the microsampler´s midi mode to USB only (not midi+usb). |
PC. No external audio interface.
I'll try that when I wake up.
However. I checked the driver in the XP device manager. Seems like it doesn't recognize the Korg-driver. I even uninstalled the Microsampler and reinstalled the Korg-driver and the Microsampler. Hm. Well. I'll try your suggestion tomorrow and return if the problem remains.
Thank you! |
|
Back to top |
|
|
McVicar
Joined: 15 Oct 2009 Posts: 9
|
Posted: Sat Oct 31, 2009 10:28 pm Post subject: |
|
|
Did a quick one, changing global parameter to USB only. Didn't work. :/ |
|
Back to top |
|
|
jbl Full Member
Joined: 06 Oct 2009 Posts: 100
|
Posted: Sun Nov 01, 2009 12:21 am Post subject: |
|
|
it's very convuluted. what i finally had to do is all in the instructions but i didn't get it the first time. basically get you're microsampler connected via usb and then you have to install the driver to THAT usb port. from the programs/korg/drivers option. |
|
Back to top |
|
|
McVicar
Joined: 15 Oct 2009 Posts: 9
|
Posted: Sun Nov 01, 2009 7:20 am Post subject: |
|
|
jbl wrote: | it's very convuluted. what i finally had to do is all in the instructions but i didn't get it the first time. basically get you're microsampler connected via usb and then you have to install the driver to THAT usb port. from the programs/korg/drivers option. |
I FOUND IT! WAAH!
I thought the "driver" I downloaded was installed and ready to go when I clicked it. Oh man!!!
THANK YOU SIR! (Now I just hope _this_ works haha) |
|
Back to top |
|
|
McVicar
Joined: 15 Oct 2009 Posts: 9
|
Posted: Sun Nov 01, 2009 9:28 am Post subject: |
|
|
WOOOOHOOOOOOOOOOO!
THANK YOU SOOOO MUCH! YEEHAW!
Works like a charm. Now, I'm gonna stuff the bastard to the limit!!! |
|
Back to top |
|
|
jbl Full Member
Joined: 06 Oct 2009 Posts: 100
|
Posted: Mon Nov 02, 2009 2:35 pm Post subject: |
|
|
glad it worked for you. tell us when you get fed up with the software though, ok. |
|
Back to top |
|
|
microboy
Joined: 09 Dec 2009 Posts: 8
|
Posted: Mon Dec 14, 2009 11:15 am Post subject: NO MIDI IN/OUT with WINDOWS XP SP2 |
|
|
HI!
i can't have midi working via USB on WINDOWS XP SP2.
any suggestion?
editor works without problem but when i open my CUBASE 4 no MIDI IN/OUT comes.
i also tried it on my POWER BOOK G4 running OS X (latest version before leopard) and MIDI trough USB WORKS fine.
i installed the driver in the same way on both machine.
does anybody can help?
don't think is something about MIDI and AUDIO DRIVERS to be setted up in CUBASE 4 as i am good with that..
coul be a problem with my OS version or Windows service Pack version?
thnak you |
|
Back to top |
|
|
xtal z1
Joined: 08 Jul 2010 Posts: 6
|
Posted: Thu Jul 15, 2010 9:44 pm Post subject: |
|
|
i can't, just can't get this right. i'm getting really mad. can someone write a tutorial how to do this using only korg's drivers downloaded from their website? |
|
Back to top |
|
|
X-Trade Moderator
Joined: 14 Feb 2006 Posts: 6494 Location: Leeds, UK
|
Posted: Thu Jul 15, 2010 10:49 pm Post subject: |
|
|
xtal z1 wrote: | i can't, just can't get this right. i'm getting really mad. can someone write a tutorial how to do this using only korg's drivers downloaded from their website? |
1. Download the latest KORG USB-MIDI driver. You should do this from the 'support' or 'downloads' section for your product, although the driver is universal to all KORG products so you don't need to download more than one if you already have the latest.
2. Run the installer you downloaded and follow the wizard
--MAY be worth rebooting at this point--
3. Plug in your KORG device
4. Run the utility 'Install KORG USB-MIDI Device' in 'Start>Programs>KORG>KORG USB-MIDI Driver'
5. Select your Korg product/device and click 'install'.
6. Click continue if you get a driver not digitally signed warning box
7. Your KORG product is installed and it's virtual MIDI ports should show up in the editor and any other DAW or MIDI related software you may have. _________________ Current Gear: Kronos 61, RADIAS-R, Volca Bass, ESX-1, microKorg, MS2000B, R3, Kaossilator Pro +, MiniKP, AX3000B, nanoKontrol, nanoPad MK II,
Other Mfgrs: Moog Sub37, Roland Boutique JX03, Novation MiniNova, Akai APC40, MOTU MIDI TimePiece 2, ART Pro VLA, Focusrite Saffire Pro 40.
Past Gear: Korg Karma, TR61, Poly800, EA-1, ER-1, ES-1, Kawai K1, Novation ReMote37SL, Boss GT-6B
Software: NI Komplete 10 Ultimate, Arturia V Collection, Ableton Live 9. Apple OSX El Capitan on 15" MacBook Pro |
|
Back to top |
|
|
xtal z1
Joined: 08 Jul 2010 Posts: 6
|
Posted: Thu Jul 15, 2010 10:52 pm Post subject: |
|
|
thank you! i'll try that and post the results. |
|
Back to top |
|
|
xtal z1
Joined: 08 Jul 2010 Posts: 6
|
|
Back to top |
|
|
xtal z1
Joined: 08 Jul 2010 Posts: 6
|
Posted: Thu Jul 15, 2010 11:56 pm Post subject: |
|
|
i did it! other way, but it did it! finally i can enjoy my sampler. thanks for help anyway. |
|
Back to top |
|
|
|