View previous topic :: View next topic |
Author |
Message |
landy856
Joined: 15 Aug 2010 Posts: 3
|
Posted: Sun Aug 15, 2010 1:43 pm Post subject: Cannot access programs |
|
|
Hi
After a long break renovating a house my Karma is out of its box.
But i cannot access the programs only the combinations.
The 'prog' key, and the' F2' key used to access programs from the main window do not work. The F2 key is hardy used so should not be worn.
Could this be a software issue? Its seems odd to me that these are the only keys not to work.
I am running software ver 2 and recently installed the Trance Attack expansion card.
Any help would be much appreciated.
Thanks |
|
Back to top |
|
|
Synastikki Senior Member
Joined: 13 Jun 2006 Posts: 440 Location: Finland
|
Posted: Sun Aug 15, 2010 3:16 pm Post subject: |
|
|
well it could be some dirt or dust under those buttons that prevents them from working. Also what you should try is to remove the trance attack board and see if the buttons work after that. If so it is most likely just static problem with the expansion board. And if it is a dust/dirt problem you can try to blow air under the buttons... Also you should remove all the pedals and midi cables and try if it works without them connected, because it might be a midi issue. _________________ Korg Triton Classic 61-keys, Native Instruments Kore 2 (SW&HW) |
|
Back to top |
|
|
karmathanever Platinum Member
Joined: 12 Jan 2004 Posts: 10406
|
Posted: Mon Aug 16, 2010 2:10 am Post subject: |
|
|
In addition to the excellent suggestions from Synastikki, it might be worth a clean install of OS 2. As Synastikki says, remove all EXB boards, all cables, do a clean OS 2 install and see if it works.
Good luck
Let us know how you go...
Pete _________________ PA4X-76, Karma, WaveDrum GE, Fantom 8 EX
------------------------------------------------------------------
## Please stay safe ##
...and play lots of music
------------------------------------------------------------------ |
|
Back to top |
|
|
landy856
Joined: 15 Aug 2010 Posts: 3
|
Posted: Mon Aug 16, 2010 12:04 pm Post subject: |
|
|
Thanks very much for the prompt replys.
I have tried removing the Trace Attack board but still not working.
I will now go thru the other recommendations and will let you know how i get on.
Thanks again |
|
Back to top |
|
|
landy856
Joined: 15 Aug 2010 Posts: 3
|
Posted: Wed Sep 15, 2010 1:40 pm Post subject: |
|
|
Tried everything as suggested and still no luck.
Looks like it has to go to the fixers.
Thanks again |
|
Back to top |
|
|
EJ2 Approved Merchant
Joined: 13 May 2002 Posts: 2292 Location: Port Rowan, Ontario, Canada
|
|
Back to top |
|
|
|