View previous topic :: View next topic |
Author |
Message |
Zimboo
Joined: 07 Nov 2010 Posts: 2
|
Posted: Sun Nov 07, 2010 7:27 pm Post subject: Audio in |
|
|
Hi guys
I just got an EMX1 SD recently and I want to know how to run my friend's bass through my EMX so I can mess around with the sound and we can do some jamming... I've seen people do it on youtube but no one really straight up explains. Thanks |
|
Back to top |
|
|
Aciphecs Platinum Member
Joined: 16 Aug 2010 Posts: 558 Location: Biblical Proportion, Michigan
|
Posted: Sun Nov 07, 2010 7:44 pm Post subject: |
|
|
1) Plug the guitar in the back of the ESX audio in, press the Auio In Thru button
2) Hit the Audio In part key, then the Keyboard button.
3) Place a note on the first step of your pattern.
4) Hit the Step edit button and arrow down to Gate Time.
5) Change the gate time to 128.0 for a pattern that is 16 in length. This will allow for the guitar sound to last the duration of the pattern.
6) Make sure the audio in volume in set very low to begin with!
7) Hit play to start the pattern, begin to play the guitar.
8. Bring the audio volume up if necessary.
Pg 43 of the manual has a breakdown also if this doesn't help _________________ BP Soundcloud Page
BP Facebook Page
BP Youtube Channel |
|
Back to top |
|
|
Zimboo
Joined: 07 Nov 2010 Posts: 2
|
Posted: Sun Nov 07, 2010 9:30 pm Post subject: |
|
|
Thanks so Much!!! I figured out in the mean time how to work it, but I didn't figure out the Gate Time thing, it helps alot
Thanks again! |
|
Back to top |
|
|
Aciphecs Platinum Member
Joined: 16 Aug 2010 Posts: 558 Location: Biblical Proportion, Michigan
|
|
Back to top |
|
|
Marsu
Joined: 07 Apr 2011 Posts: 10
|
Posted: Tue May 10, 2011 1:26 pm Post subject: |
|
|
This helped me to kinda jam with the electribe, but what if I'd want to use the mx effects on my bass? Is it even possible? |
|
Back to top |
|
|
neotechtonics Platinum Member
Joined: 01 Jul 2010 Posts: 514 Location: Durban, South Africa
|
Posted: Tue May 10, 2011 3:13 pm Post subject: |
|
|
so u can use the audio-in-thru to gate the incoming signal? interesting i didnt know that... time to do some 'sperimenting _________________ http://soundcloud.com/neotechtonics
KORG GEAR: EMX1-SM -- EMX1-SD -- KAOSS PAD3 -- MICROKORG -- KAOSSILATOR PRO -- NANOKONTROL1
OTHER GEAR: Roland SP404, MC303 -- Akai MPC-2500 SE -- Zoom R16 -- effects pedals -- DJ-gear -- Access Virus B |
|
Back to top |
|
|
Aciphecs Platinum Member
Joined: 16 Aug 2010 Posts: 558 Location: Biblical Proportion, Michigan
|
|
Back to top |
|
|
chad9477 Full Member
Joined: 07 Jan 2009 Posts: 249 Location: Washington DC
|
Posted: Wed May 11, 2011 1:49 pm Post subject: |
|
|
Marsu wrote: | This helped me to kinda jam with the electribe, but what if I'd want to use the mx effects on my bass? Is it even possible? |
Absolutely it's possible -- whatever efx you assign to the synth part for the audio in will affect the sound. I do this with guitar all the time. _________________ EMX-1, KP3, MachineDrum UW+, Octatrack, FCB-1010 Pedal, Mackie PA, Taylor T5
http://dubathonic.bandcamp.com/ |
|
Back to top |
|
|
Marsu
Joined: 07 Apr 2011 Posts: 10
|
Posted: Thu May 12, 2011 4:42 pm Post subject: |
|
|
Okay now I'm at a point where audio in thru plays the bass, but I still can't get the 'pattern' play it constantly (so I can actually use the effects) although it works just fine with a mic... weird.
edit: got it working without doing anything but test it with a mic once more... welll at least it's working Thanks all for help. |
|
Back to top |
|
|
|