View previous topic :: View next topic |
Author |
Message |
WaveAxis
Joined: 02 Aug 2012 Posts: 4
|
Posted: Thu Aug 02, 2012 1:45 pm Post subject: korg wavedrum EXTERNAL pressure sensor |
|
|
Do you think it is possible to take out the pressure sensor and make it as a pedal? will this affect the tuning of the whole instrument? because i would like to tighten the head after removal of pressure sensor. thank u guys |
|
Back to top |
|
|
WaterDrum Senior Member
Joined: 01 Apr 2011 Posts: 340 Location: 3rd Stone from the Sun , Bavaria
|
|
Back to top |
|
|
WaveAxis
Joined: 02 Aug 2012 Posts: 4
|
Posted: Thu Aug 02, 2012 4:09 pm Post subject: pedal |
|
|
no I want to keep the physics of the wavedrum. I was wondering if I remove the sensor I will get a better rebound... but i dont know if the head will become too loose. then i will have to tune with screws.. and then there is a possibility to get an error message at the head. And the pressure sensor is Force sensitive resistor or piezo? can I replace it or use the one in wavedrum to construct a pedal? |
|
Back to top |
|
|
WaterDrum Senior Member
Joined: 01 Apr 2011 Posts: 340 Location: 3rd Stone from the Sun , Bavaria
|
Posted: Thu Aug 02, 2012 4:31 pm Post subject: |
|
|
remove the shield and tune up
no error message.
no more internal pressure control ...
tune up slowly and carefully , (not too much)
takes 5 minutes
please tell us your results... |
|
Back to top |
|
|
|