View previous topic :: View next topic |
Author |
Message |
marcdeben Senior Member
Joined: 07 Jul 2002 Posts: 265 Location: Boston
|
Posted: Fri Jul 02, 2004 12:15 pm Post subject: Saving Varius samples |
|
|
Hi folks,
I will ask this question again. I did not get much help on my last post.
I want to copy different samples with its related pcg data from many sample CD's or From downloads on one CD or Orb, so I can go to a gig and load in 1 CD with all the sample sounds I am using for lets say Set 1
and it will load in the samples and PCG data in e-bank in the order I want.
Then have another cd for set 2 if needed etc. For instance, I want to save 2-3 sounds from VL project and 1 of the chorus guitars download, etc. Not the whole download and pcgs data just specfic sounds with its specfic pcg data.
I have tried and tried and tried and can not figure out how to do this.
If any one can tell me how to do this I will be overjoyed. I need it step by step, if at all possible. My expertise is not in programing. My family would appreciate it also, as I spend hours in my little studio cursing and throwing thinks. My wife thinks I'm nuts (what else is new) and my kids think I'm mad. Nice Huh!
Thanks in advance.
and Please tell me I'm not the only idiot out there that can't figure this out
Marc |
|
Back to top |
|
|
marcdeben Senior Member
Joined: 07 Jul 2002 Posts: 265 Location: Boston
|
Posted: Fri Jul 09, 2004 1:12 am Post subject: |
|
|
Come on guys and gals, is this too obvious or to hard to explain.
anyone!
Marc |
|
Back to top |
|
|
jerrythek Platinum Member
Joined: 28 Jan 2002 Posts: 2931
|
Posted: Fri Jul 09, 2004 2:25 am Post subject: |
|
|
So no one's showing you any "love", huh? Sorry to see that.
This can be a complex process depending on just how little of each download/PCG you want to use, but here's a start.
The first file you want to load you should just load the normal way. You'll likely load the PCG file into Bank E and the samples will all load in. Now you can go through the Programs and decide which ones you want to keep and which you don't need.
You'll need to study the Porgrams you don't want so you can find out what multisamples they use (EDIT: Basic, Osc. Basic pages). then you can go into Sample Mode and delete each multisample (Delete MS command), also checking the "Delete samples too" command so you clean out the samples they use.
Next I would run the "Move Multisample" command, checking off the "optimize Empty multisample" command to put all the remaining samples in linear order. Be sure to also check off the "Adjust Multisample Assign in Program" box!
Next I would go through the Porgram E bank and rewrite the Programs you really want into linear order, starting at E000 and moving the Programs in a logical setup (E000, E001, E002). let's say you needed 5 Programs, so you'll locate them at E000-E004, right?
Now you have picked what you want from that data load. If you want you could make a backup of this data at this point just for safety. If all goes well you can delete it from your drive later.
For the second file you'll want to use the "newer" way of loading sample data. Highlight the next PCG file that you want to work with and instead of choosing "Load Selected" choose the upper RH "Load PCG (RAM + Samples)" Command. This will let you merge the new data into what's in memory already. So when the screen comes up you should start the merged load at E005.
This will load the next PCG and all the samples in memory. Now you start the above process again. Shop through it, pick what you like, study what you don't need so you can delete the un-needed multisamples. Delete them (and Samples, too) and then re-optimize/move your multisamples to clean up sample memory.
Re-organize the new programs so they occupy from E005 and higher as you want.
Keep doing this, using the "Load PCG (RAM + Samples) way of loading to keep merging the new data in, then parse through it picking what you need, deleting the samples you don't and reorganzing your Programs until you've built up your favorite data load.
Then be sure to save this (a PCG containing the E Bank Programs) plus ALL sample memory.
It may sound hard, but you'll get the hang of it. It's a bit of work but it can be done and you'll feel great when you've accomplished it.
Now maybe you see why no one answered - it takes a bit of experience/knowledge to do this, and even more determination to write it all out!
Good luck.
Jerry |
|
Back to top |
|
|
marcus Senior Member
Joined: 23 Dec 2002 Posts: 469 Location: Fayetteville, North Carolina
|
Posted: Fri Jul 09, 2004 3:37 am Post subject: |
|
|
Wow Jerry That's "Exactly" what I was going to say
anyway........................................ _________________ marcus
"Emmaus Street"...[would you have recognized him?] |
|
Back to top |
|
|
marcdeben Senior Member
Joined: 07 Jul 2002 Posts: 265 Location: Boston
|
Posted: Fri Jul 09, 2004 5:03 pm Post subject: |
|
|
Jerry,
Thank you, thank you, thank you!!!!!!!!!!!!!!!!!
I figured it was complicated and would take a bletheria of knowlege ( like that word?) to explain it and a long time consuming post. As usual you are best rep korg or otherwise.
Thank you so much again. It sounds a little complicated but with a little practice I will do it and make my life at gigs so much easier.
Best wishes
Marc |
|
Back to top |
|
|
marcdeben Senior Member
Joined: 07 Jul 2002 Posts: 265 Location: Boston
|
Posted: Fri Jul 09, 2004 5:06 pm Post subject: |
|
|
Sharp,
I think you should move this to the classic threads section.
I think Jerry expaination could help a lot af Tritonians.
Thanks
Marc |
|
Back to top |
|
|
Sharp Site Admin
Joined: 02 Jan 2002 Posts: 18197 Location: Ireland
|
Posted: Fri Jul 09, 2004 7:01 pm Post subject: |
|
|
Consider it done. |
|
Back to top |
|
|
Drew FM Platinum Member
Joined: 14 Oct 2003 Posts: 515 Location: Fenton, MI U.S.A
|
Posted: Thu Jul 15, 2004 4:05 pm Post subject: |
|
|
Shoot!, This was confusing me to! Thank you so much Jerry.
Might want to add that when loading that 1st PCG file, (using just "load selected"), it will overwrite any GLOBAL settings you may have had. I think...
Andy _________________ Create to enjoy, not to destroy |
|
Back to top |
|
|
classic99
Joined: 19 Oct 2004 Posts: 5 Location: CHI. IL. USA
|
Posted: Tue Oct 19, 2004 6:13 pm Post subject: this helpedd me alot |
|
|
thx for saving me alot of time tring to figure this out on my own |
|
Back to top |
|
|
|