Volca stand

Sclr · Post by **Sclr** » Wed Feb 19, 2014 6:13 pm

I found this on ikeahacker when i was looking for a stand for the volcas:
http://www.ikeahackers.net/2010/08/lapt ... stand.html
It was a little too wide and wouldnt work for the volcas but its a solid idea. I used some smaller handles which fit the volcas and allowed some more room so i could stack two volcas on one set of brackets.

It needs another handle or brace for the rear but it works great. I used the 7 1/8th bracket. Fits two volcas nicely. I could see getting a bigger version of the brackets and line three up. I think any bookshelf bracket would work. But this is a cheap solution.
Bracket
http://www.ikea.com/us/en/catalog/products/56696109/
Handle
http://www.ikea.com/us/en/catalog/products/90038541/

gabrielstigmatic · Post by **gabrielstigmatic** » Fri Feb 21, 2014 3:23 pm

Good idea, man! I might try this out for myself. I have been thinking about viable options for a stand. I can't stand staring straight down like that for long.

elpiulas · Post by **elpiulas** » Thu Sep 04, 2014 9:04 am

Hello, my particular stand version for my 3 volcas.

Total cost: 12 €

Vint4ge · Post by **Vint4ge** » Thu Nov 06, 2014 9:43 am

http://cremacaffedesign.com/projects/hero/

Butterfingersbeck · Post by **Butterfingersbeck** » Tue Nov 11, 2014 9:59 pm

I find that this works very well for a single Volca if you fold the top section back. Cost - 99p from your local branch of 99p Stores!

Vint4ge · Post by **Vint4ge** » Thu Jan 14, 2016 4:18 pm

HERO tabletop stand for small devices
http://cremacaffedesign.com/hero/

Kroy · Post by **Kroy** » Sat Dec 26, 2020 12:30 am

All these stands look very funky but I just find Volcas easiest to work with when they're flat.

Korg Forums

Volca stand

Volca stand

Hero · Design tabletop stand for the Volca series (and more)