Korg Forums

theansweris42? · Joined: 23 Oct 2014 Posts: 5

Hi there

Apologises for going over old ground but I am bit confused about the type of cable to use with my Volca Series instruments and my audio mixer.

I plan to use a mono 3.5mm cable going into a 6.25mm mono adapter at the mixer.

Is this best option? The reason I ask is because I have read in this forum that using mono cables with the Volca Series might not be a good idea.

Many thanks.

roblabs · Posted: Fri Oct 24, 2014 1:57 am Post subject:

Use a stereo 3.5 to mono 6.25 cable for best results.

theansweris42? · Joined: 23 Oct 2014 Posts: 5

Hi rob

Thank you for your reply.

Where would be the best place to source a stereo 3.5mm to mono 6.25mm cable?

Could I use a stereo 3.5mm to 3.5mm with a mono 6.25mm adapter?

Thanks again.

Butterfingersbeck · Joined: 19 Oct 2014 Posts: 27

Ebay. I managed to pick up suitable cables for about £5. And don't bother with adapters - they're nothing but trouble. Just get the right cable.

http://www.ebay.co.uk/itm/190-231UK-chord-MP3-JK-Stereo-minijack-to-mono-6-3mm-jack-lead-1-5m-/390735085128?pt=UK_Musical_Cables_Leads_Connectors&hash=item5af9a03e48
_________________
Communication is everything.

theansweris42? · Joined: 23 Oct 2014 Posts: 5

Thank you for everyone's help.

I am going to check out this cable:

http://www.gak.co.uk/en/hosa-3.5mm-jack-to-in-jack-balanced-mono-cable-cmp-110-3m/35529