Korg Forums

Hi again everybody. I got it finally to a korg support center in my country and they fixed it. Seems the internal memory was corrupted for some reason and they reestablished the files, so it was totally a software issue and they didn't have to make any motherboard replacement or anything like that ...

Can you try downloading the lastest Firmware again. Extract it to an SD card Boot up the Kross using the SD card to reinstall the update. Then report back what happens. I've tried this but the brick remains without change at all, but thanks for your suggestion still. - In the case of firmware ...

I do not understand how you had successed in flashing a Kross 1 firmware on a kross 2. it seems impossible: - folders have different name (KROSSSYS vs. KROSS2SY): the boot process of the Kross cannot find the right folder and cannot flash it - the number and types of files to flash are different ...

Mic input is 6.3mm (1/4") phone jack TS unbalanced and doesn't support phantom power, it should be fine with that mic in particular I think. Here you can check most of the technical specs for Kross2. Recording quality is 48khz/16bit which is decent but far from ideal probably. https://www.korg.com ...

Oh i see! They should have made the system distinguish which files are for each one.. Except if you tried to alter the files so it will load it..! I think that by forum rules you should remove the keys you mention here as they are for service centers only. I will try to get the files for you and ...

How have you managed to brick it? What has gone wrong? I messed up and put the files of the Kross 1 instead of Kross 2 by mistake and tried to update. The update process failed and it didn't get completed actually (it said so on the screen after trying to update, progress went up to 97% and then ...

If there is an SD card in the system, remove it and try rebooting again. A corrupt SD card can cause problems. If that doesn't do it, then try a Kross system initialise: with the Kross powered off, hold down the Exit and Function buttons, and turn on the Kross. The preload data will need to be ...

Hi, I seem to have bricked my Korg Kross 2 trying to update it, and I can't seem to unbrick it, when I power it up, it keeps getting stuck at "Korg Kross" screen no matter what. I've tried to re-initialize it according to the operation manual troubleshooting but it doesn't works at all. I also ...