Korg Forums

http://www.korgforums.com/forum/phpBB2/ ... highlight=

Sam

Hi blazerunner! I sometimes get this distortion when I use the Kronos USB and a Focusrite Scarlett with Logic Pro. I think it is a clock synchronization issue with Kronos USB audio and an external audio interface. When you plug in the Kronos by USB, Core Audio wants to use the Kronos USB as the ...

SD: I just sent you a PM. Sam

Hi All! I have sold my Trinity and TR-Rack, but I did build a TR-Rack PBS library. PM me if there is interest, and I will offer a .PCG file and a .KSC file. Please be mindful as there are licenses with the samples. The KSF and drum DS samples were pulled from the TFD 1S-4S floppies. I could not find ...

I got it working! In the editor, Make the Mod Knobs Blue (bipolar) Select the 8 PART Mod Knobs (not the Global Mod Knobs) In the FX edit, Assign the most desired Part FX to FX1 (and Shift FX2 FX3) From the FX Macro page, span the screen Macro knobs before you assign the PART mod knobs and set the ...

Hi All! My time with the Wavestate is still great! The editor makes light work of creating sample lanes, wave sequences, programs and performances! I Like! Using the editor, I cannot simultaneously adjust the effects - I have to manually select each program and adjust E1. Using the editor, I am also ...

Hi All! I recently made some programs combis and favorites for my original Kross 61. IFX 1-5 typically reserve the utility effects: Distortion, Wah, Compression, Limiter, Para EQ, Phaser, etc. MFX 1 and 2 allow the fancier shared effects Chorus, Delay, Reverb, Rotary Speaker, etc. I assume this was ...

HI Luca and voip! Power supply voltages to 1820 and 1825 appear ok. We are looking at the 5V and -12V voltage regulators on the power supply board. Maybe a solder touch up will fix the 12v fluctuation. We are also considering the 5V supply to the the display. Also: Hold Enter-Reset and try to reboot ...

Moving discussion offline.

We are checking the power rails to each board.

Sam

Hi luca! Trinity should still boot with 2.8 volts of backup battery. Yes the Trinity should boot without a floppy or audio/midi board connected. There is no harm in unplugging and trying. There are 4 power connectors. You can unplug 3 and check the voltages, then connect one and recheck, then ...

Found it. Swipe the controller to the left and delete. Sam

Hi BrotherAJ! I had a similar issue with iWavestation. Here's what I did for Module Backup your set lists. Copy them from your iPad local storage to your iCloud Drive. From Settings General Storage: Delete the app and all settings. Then re-download the app and restore your expansion pack purchases ...

Hi (Un)luckyluca .... Voltage drift suggests power supply issues.... Get the Trinity service manual Replace the BR2032 battery Clean and re-seat the power connectors Unplug power to the USB floppy and restart. (this uses one of the 5V rails) Check for cracked solder joints by the voltage regulators ...

Hi Schlap1! You have to update to 1.06 using a MacOS earlier than 11. I used 10.13 High Sierra. On the PC, you can use Windows 7, 10 or 11. Once updated to 1.06, change the usb protocol to RNDIS for Windows 7 or 8 running 1.06 NCM for Mac or Windows 10 Also check the installation PDF for any ...

Michael, I PM'd you and sent some files for you to test. The easy tests first: Global MIDI Chanel 1 Sysex Controllers on etc. Wiggle the 1/4 in cables in the audio outs, re-soider if intermittent. Turn off, remove all Simms and EXB boards (Moss can stay installed) Wiggle the headphone jack, re ...