Korg Forums

I ordered one from a site it was it would work for the r3 and what do you know it doesn't. and when I asked for the correct one they told me they have been discontinued. has anyone ordered an r3 adapter or equivalent online and had success with it? a link would be greatly appreciated

I'm about to start gigging soon. so far I have an emx, es, r3, a mixer and a 61 key yamaha. I want to know what kind of stand(s) or table I should get to set my gear upon. I've looked a dj tables and they're expensive but seems like the only logical route if I want to expand my setup. what do y'all ...

No, stop! Try the baking paper between the two boards trick, it could rectify it for free. There are tips on here how to do it. When that happens it is usually just the solder on the underside of the top board shorting on the large caps on the bottom board. can you link me to some of the tips maybe ...

Out of interest, in what way is it going out? Anyway, if you do a full dump of the memory onto a SM card, you can put it onto a pc, transfer it onto an SD card and then do a full load on the new emx IIRC. I know the downloadable dump of the SD patterns works on the SM version of the machine. the ...

my electribe is going out and I'd rather buy an new one than pay to get it fixed. is there a way I can get my patterns from the older model to put them in the newer one?[/img]

would something like this work?

http://www.sweetwater.com/store/detail/802

i don't really understand much how they would work but i'm guessing i'd plug emx in line one, r3 in line 2 etc. and use the l/r outputs for sound or the headphone jack?

ok. i don't live near a guitar center or anything so i'm going to the radio shack and looking around to see if i can find anything. do you have any links i can go to to look at any models?

I don't know anything about mixers. How do they work and what kind should I get?

I have an emx an r3, a Casio and another keyboard. What is the best way to play these live? I usually just play r3 in the audio thru on emx but I have more keyboards now and the sounds just contestantly get sucked out from this. Would I need a mixer or some other kind of device?[/list]

Not sure. I got it two years ago. I didn't know there was a new one

I will try different cables today when I get a hold of some. Thank you for beig helpful. I have a question to ask you. The global card or whatever ta called for the emx, can you save patterns and songs on it or what exactly does it do? I called guitar center and they told me they'd send me a new ...

Tried all jacks still static. Opened it up and the headphone jack plastic part is cracked. Idk if that's the problem. I can see that messing up the headphone jack but not the rest. Would that be the source of the static? What should I do?

i'm using amp chords to a bass amp. when i plug in my keyboard there is no static coming from the same amp using the same chords. the static is just so overbearing. i'll try the minimum volume but i'm not sure if it'll help. should i just send it to guitar center/korg to get her fixed or get a new ...

when I start it up i'm getting a lot of static and it continues for as long as it's on. i've switched to all of the audio inputs and turned the tube gain on and off and i'm still getting static. the music plays still but the static is present. has anyone else had this problem and what did they do to ...