I've been setting the top & bottom key zones forever by holding the enter key down while choosing the notes, but suddenly, now the Triton seems to be on auto pilot - only letting me choose one note for the top & the bottom. That is to say, if I choose the bottom note, then I move on to choose the top one, it will only allow it to be the same as the bottom note.
Is there some universal setting that's getting in my way? It's the same no matter which combination I'm working with. Can anybody give me a clue?
Thanks.
wonky key zone issues
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
cosmic tones
- Posts: 4
- Joined: Mon Nov 27, 2006 1:47 am
- Location: Portland OR
Try looking at the pre-existing keyzone for the prog
It's only a clue and maybe not the right answer here but take a look at the pre-existing (default) keyzone for the prog within your combi. I have seen where the pre-existing zone starts off with only one single key as the high and low or I used my mod dial incorrectly and set the zone to only one key. When you're in the Keyzone menu try selecting the prog within your combi and spin the mod dial clockwise and counter clockwise and see if you don't notice the keyzone expand on the display. If that doesn't work, I guess you need more clues!! Good luck!