creating styles (copying)

Discussions relating to the Korg Pa2X Pro, Pa800 & Pa500

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
armaan
Posts: 40
Joined: Tue Oct 16, 2007 6:13 am

creating styles (copying)

Post by armaan »

Does any one know how to copy (for example: variation one to intro one)?
for some reason Korg doesn't allow this function. It makes it difficult for us to write a new track for the intro since you cannot copy variation 1-4 to intros
User avatar
BasariStudios
Approved Merchant
Approved Merchant
Posts: 6510
Joined: Sun May 29, 2005 4:56 am
Location: NYC, USA
Contact:

Post by BasariStudios »

Its very EASY, it cant be EASIER, when you choose a VAR keep going forward
and you'll get to CVs instead of VAR, then you can copy a CV from anywhere
to anywhere.
http://www.basaristudios.com
Cubase 8.5 Pro. Windows 7 X64. ASUS SaberTooth X99. Intel I7 5820K. ASUS GTX 960 Strix OC 2GB. 4x8 GB G.SKILL.
2 850 PRO 256GB SSDs. 1 850 EVO 1TB SSD. Acustica: Nebula Server 3 Ultimate, Murano, Magenta 3, Navy, Titanium.
armaan
Posts: 40
Joined: Tue Oct 16, 2007 6:13 am

Post by armaan »

thanks for the tip[
armaan
Posts: 40
Joined: Tue Oct 16, 2007 6:13 am

ts very EASY, it cant be EASIER, when you choose a VAR keep

Post by armaan »

I tried this also and it didnt work/ Using the OS 1.51 Trying to copy a from veriation one CV1 to an intro and it doesn't happen
User avatar
BasariStudios
Approved Merchant
Approved Merchant
Posts: 6510
Joined: Sun May 29, 2005 4:56 am
Location: NYC, USA
Contact:

Post by BasariStudios »

Yes it does, it has to be VAR 1 CV1 to INTRO1 CV1 or whatever but CVs
have to be coppied, not whole elements. Make sure you sellect ALL.
http://www.basaristudios.com
Cubase 8.5 Pro. Windows 7 X64. ASUS SaberTooth X99. Intel I7 5820K. ASUS GTX 960 Strix OC 2GB. 4x8 GB G.SKILL.
2 850 PRO 256GB SSDs. 1 850 EVO 1TB SSD. Acustica: Nebula Server 3 Ultimate, Murano, Magenta 3, Navy, Titanium.
Masi_music
Junior Member
Posts: 57
Joined: Sun Sep 23, 2007 4:08 pm

Post by Masi_music »

nedim jam can you post a step by step copying format because i donno were to go to copy the styles to like var 2 or 3 or intros
User avatar
sehasafade12
Platinum Member
Posts: 580
Joined: Tue Sep 26, 2006 7:07 pm
Location: Southern California, USA

Post by sehasafade12 »

Nedim wrote:Yes it does, it has to be VAR 1 CV1 to INTRO1 CV1 or whatever but CVs
have to be coppied, not whole elements. Make sure you sellect ALL.
Hello Nedim:

I had this weekend off and finally started getting serious about trying to learn more about Pa800. I have tried your suggestion for copying Var1 to intros, endings, fills and so on but for some reason it is not working. I did copy VAR 1 CV1 to Fill 1 CV1 but when I press on Fill 1, there is no sound. I also made sure to select ALL. Hope you could put a step by step info for us. Thanks in advance.

Best Regards,

Fahim, :D :oops:
Life, is like a dead end road, with out music.....
Korg Pa3X, Korg Pa800 and Korg Triton Studio 76.............
User avatar
rikkisbears
Platinum Member
Posts: 1750
Joined: Mon Oct 15, 2007 3:50 am
Location: NSW , Australia

Post by rikkisbears »

Hi ,
it does work. Thanks to Needim I managed to work out that I could copy a variation to an intro.


http://www.korgforums.com/forum/phpBB2/ ... hp?t=29231

best wishes
Rikki
best wishes
Rikki

HOBBYIST

PA5X 88 note
Wavesart CFX 9ft Grand Piano 🥰
Wavesart Japanese Grand Piano

Roland FP10 piano

Yamaha PSR SX900

Band in a Box 2023
Post Reply

Return to “Korg Pa2XPro - Pa800 - Pa500”