PA1X Styles to PA80

[Choros]

No they aren`t. And they cannot be converted as there isn`t any
applicative software on the planet.

[BasariStudios]

Why dont you guys do the following:
Get styles from PA800, open them in PA1X, they work there, then SAVE
them as PA1X SET, then convert them to PA80, that WILL work.

[Choros]

Hi Nedim,

to read the PA800 styles, the PA1 needs to use OS3.0.
But then, (due to OS3.0), the exported format is equal to PA800
again and that format cannot be converted.
Am I right?

Regards

Choros

[aty]

Hi,

Can somebody please give a step by step instructions on how to load these PA1X styles to PA80. Here's how I tried to do it: 1) Downloaded it to a computer here at work as compressed files; 2) Extracted the files; 3) Saved files to floppy disk; 4) Loaded files to PA80.

Nothing happens.

Thanks,
Al

[Choros]

Insert floppy- press disc-press load-press HD to see
content of FD-then select what you are going to load
into the userbanks.
(Consider that those styles need tweaking).

Regards

[aty]

Insert floppy- press disc-press load-press HD to see
content of FD-then select what you are going to load
into the userbanks.
(Consider that those styles need tweaking).

Regards

Thanks for your response, Choros, I believe this is how I did it. Select and load one style at a time afterwards, right? Let me try it again and I'll let you know. I wanna listen to one style and see how much tweaking needs to be done.

Thanks again!
Al

[Choros]

ok aty,

you can also try loading the complete USER01; 02; 03 . . . sets
one by the other, but sporadically this won`t work- due to source.
Regardless what you load, the KORG asks you for the destination.
So you`re deciding where to put the stuff.
Of course it`s possible to load just specific styles into a specfic
USER Bank or you can overwrite existing styles.

Regards

[aty]

ok aty,

you can also try loading the complete USER01; 02; 03 . . . sets
one by the other, but sporadically this won`t work- due to source.
Regardless what you load, the KORG asks you for the destination.
So you`re deciding where to put the stuff.
Of course it`s possible to load just specific styles into a specfic
USER Bank or you can overwrite existing styles.

Regards

Got it! I loaded some styles not all.

Thanks again!

Of course thanks to Raporsuz for sharing these PA1X styles!

[raporsuz]

Pa1x To Pa80 Sityles

[cosmin7]

i need style from pa1xPro format pa80.who can help me?

[Choros]

At the moment there is no applicable Software around.
Converting is not possible.
Check out this thread to find old conversions.
There are hundreds of them, (PA1X to PA80).

[jim parkin]

Hi all,

could any member of this PA80 fan forum try to get to the PA800 styles,
original or converted. If wanted I can assist with converting by using
EMC.

Choros

hi choros,, here is the pa800 styles in your E Mail..jim/p

[Choros]

Hi Jim,

thanks a lot for your mail with attachment. Have received it.
I already have had the styles, but your package looks a bit
different. Will evaluate this after getting to a running XT SW.
XT still doesn't handle PA2 or PA800 format.

Bregards

Choros

[cosmin7]

i wanted style from pa1x format pa80.who can help me?pls

[Choros]

Read this thread. You will find everything in here.