loading new style to PA1x pro

Nishra · Post by **Nishra** » Thu Jan 24, 2008 3:10 pm

hey guys! i having problem loading the new set in my pa1xpro....when i load the style...the accom is working perfectly but the beats not working properly...there is some sounds involved in it like telephone connection or some weird wave alien sounds lol ...when i change the drum kits and percu to orginal pa1 drum it work properly.. but i want to use the User DK drums for new style...which are multi sampler and it sounds like i said ........... guys can u help me.. am i missing something? plz help

regards

wittid · Post by **wittid** » Thu Jan 24, 2008 3:53 pm

seems that in the user dk the right sounds not on the places they should be - at dk´s there are standards - maybe you must change the keys the sounds lying on - means - re-organise the user dk.

cu
Detlef

some1uk03 · Post by **some1uk03** » Fri Jan 25, 2008 10:13 pm

Hey,

That was the same problem i used to face and wondered for for a few weeks trying to fix it.. I finally realised that the .SET i was loading required 32MB of ram.. but i only had 16MB.. thats why not everything got loaded...

So the way i fixed it was, I bout extra RAM and now haev 32MB.. and everything loads perfectly..

Not sure if thats the case for you but have a think bout it.. Is the .SET 32MB?

Nishra · Post by **Nishra** » Thu Jan 31, 2008 11:54 am

oh yeh!!! i just check the file and the size of ti is 32.5MB... and also i checked RAM on my pa1xpro is only got 16 MB 72-pin EDO SIMM!! so 2day i ordered another 16MB RAM hopfully i will receive it next tuesday...but i got another question..can i upgrade the RAM more than 32MB ..?? for example can i have 2X32 MB RAM so i can total 64MB?

Rob Sherratt · Post by **Rob Sherratt** » Thu Jan 31, 2008 4:27 pm

Nishra wrote:oh yeh!!! i just check the file and the size of ti is 32.5MB... and also i checked RAM on my pa1xpro is only got 16 MB 72-pin EDO SIMM!! so 2day i ordered another 16MB RAM hopfully i will receive it next tuesday...but i got another question..can i upgrade the RAM more than 32MB ..?? for example can i have 2X32 MB RAM so i can total 64MB?

Hi Nishra,

Yes you can. The RAM upgrade part number is Pa2x, and gives you 128 Mb as standard with option of another 128 Mb

Best regards,
Rob

Nishra · Post by **Nishra** » Thu Jan 31, 2008 6:25 pm

hi Rob

thanks for ur reply! but i dont hv pa2 .. i have pa1xpro...so i can have 64MB RAM on PA1XPRO

Rob Sherratt · Post by **Rob Sherratt** » Thu Jan 31, 2008 10:15 pm

Hi Nishra,

It was a little humour from me. Sorry it got lost in the translation.

There has been much discussion on this forum about the maximum 32 Mb RAM limit on the Pa1x and it is a limit imposed by the circuit design of the Pa1x. There is no way round it. Certainly you can plug SIMM modules into the Pa1x that have more than 16Mb capacity but the extra address line(s) needed to use the extra RAM is/are not present on the Pa1x.

Best regards,
Rob

wittid · Post by **wittid** » Fri Feb 01, 2008 7:04 am

The filesize must not be only the used sample ram.
32 is max. at PA1X.

cu
Detlef