pa2x whit fcb 1010 program

[sas123]

how i program the fcb1010 footssw to control the
start/stop or fill
pleas if you can step by step
i not understand in korg book what is cc00-121 and cc32-10 and pc-0
mining that piano rx how can i program in fcb1010
i hope you understand me
thank you

[Rob Sherratt]

Hi sas123,

Did you read this thread where I posted about the FCB1010 configuration?

Anyway, the FCB1010 handbook tells you how to enter the values I programmed ibnto my FCB1010. You need to do other things on the Pa keyboard like assigning the CONTROL channel to one MIDI channel. As you will see from the thread below, I use channel 7 on my Pa1x:

http://www.korgforums.com/forum/phpBB2/ ... hp?t=31949

[sas123]

Sw1 = PC80, Variation 1
SW2 = PC81, Variation 2
SW3 = PC82, Variation 3
SW4 = PC99, Start/Stop Style
SW5 = PC91, Fade in/out
SW6 = PC86, Fill 1
SW7 = PC87, Fill 2
SW8 = PC88, Ending 1
SW9 = PC89, Ending 2
SW10 = PC90, Fill/Break
i see but how i do it in fcb1010
or if you can sand sysex for exmp
thank you

[Rob Sherratt]

Hi Sas,

I'm a bit pushed for time to write up the details, they are all in the FCB1010 manual, do you have this? I can send you an electronic copy if necessary.

If having read the manual you are stuck maybe Tascone would be willing to help you further?

[sas123]

I KNOW TO PROGRAM NOTH
BUT HOW I PROGRAM PC80 HOW I DO IT IN FCB1010
AND VOLUM
THANK YOU FOR YOUR HELP

[Rob Sherratt]

Hi sas123,

Tell me which page(s) of the FCB1010 user manual you are stuck on and I'll see if I can explain it better. I see no value in copying out large sections of the FCB1010 manual on this forum.

Best regards,
Rob

[Tascone]

Hi Sas,

If having read the manual you are stuck maybe Tascone would be willing to help you further?

Hi, Sas123!

Use this link to download the PC-editor utility for FCB1010 and install it into your computer: http://www.mtnsys.com/faq-fcb/PCEditorBeta.htm
Mean while put your email address on the forum so I can send you a copy of my sysex configuration file. You can than customize it exactly as you need and you’ll be ready with your FCB1010 in a minute.

Regards, Tascone.

[sas123]

like this i need to program ?
http://uk.youtube.com/watch?v=rC91krEJe4w
is ID he program from the movie is pc88 or 86
my email sasadam00@yahoo.com for sysex
thank you

[sas123]

WHAT i need to use preset configuration or global configuration
how i program pc80 to pa2x
thank you

[sas123]

Sw1 = PC80, Variation 1
SW2 = PC81, Variation 2
SW3 = PC82, Variation 3
SW4 = PC99, Start/Stop Style
SW5 = PC91, Fade in/out
SW6 = PC86, Fill 1
SW7 = PC87, Fill 2
SW8 = PC88, Ending 1
SW9 = PC89, Ending 2
SW10 = PC90, Fill/Break

ok i get it sw1-sw5 but how can i do sw 6,7,8,9,10
and padal for volum ?
thank you

[Tascone]

ok i get it sw1-sw5 but how can i do sw 6,7,8,9,10
and padal for volum ?

Sas, I've just sent you a new file. Check your mailbox.

/Tascone

[sas123]

Tascone thank you for your help
one more q
i can do 4 pad with fcb1010 if yes you can tell me how I DO IT
and thank you one more

[Tascone]

Tascone thank you for your help
one more q
i can do 4 pad with fcb1010 if yes you can tell me how I DO IT
and thank you one more

Hi, Sas!

Sorry but I can't help you with this issue.
I don't have any info about what PC-number are needed to toggle the pads functions.

Regards, Tascone.