I barely meet the requirements. I have a G4 (yeah, i know..) with an 866 mhz processor and an 380mb of ram.
I will be running this with pro tools, if this is the ONLY VST I have running in a session will I be able to function with it? Is there a way to bounce the sounds from the VST separately and bring it back in to Pro tools and layer it over my session somehow?
I am probably purchasing a new laptop min the near future though, most likely a decent spec'd macbook at the least...if and when this happens, is there a way to run the VST on the laptop and trigger it from my normal Mac so that no CPU memory is taken up in my pro tools session and all the memory is being taken up on the Macbook?
thanks.
REALLY want to purchase the KLC but...
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
Synthesizist
- Posts: 8
- Joined: Thu May 01, 2008 10:22 am
You could sync the Laptop to the Desktop via MTC (or Midiclock), handle all audio on the Desktop and all midi and VSTi on the Laptop to which also the midi-out of your keyboard goes. Then connect the audio-out of the Laptop to spare audio-ins on the Desktop.
But this is a rather cumbersome setup. You have to manage and backup two individual projectfiles, swap mouse and keyboard back and forth. Also you would ideally need two ASIO-audiocards. I dont think you use ProTools HD (with audio-hardware) ?
If you find a current Laptop with low system-latency (important for realtime streams) you could easily run both audio and VSTis.
But this is a rather cumbersome setup. You have to manage and backup two individual projectfiles, swap mouse and keyboard back and forth. Also you would ideally need two ASIO-audiocards. I dont think you use ProTools HD (with audio-hardware) ?
If you find a current Laptop with low system-latency (important for realtime streams) you could easily run both audio and VSTis.
I'm using Pro tools with a DIGI001 rack. Man, that seems really tedious...I know my computer is slow as hell, but is there a way I can record the sound in audio and not in a midi track? I really want to use the sounds from these synths so badly... if I have no options I might just have to resort to hunting for an actual ms-20 and polysix 
For the cost of a second hand MS20 and Polysix, you could probably get yourself the Korg Legacy stuff *and* a kick-arse computer...
And yes, you can just use an external computer as a stand alone synth, just feed the MIDI to it from the host computer, and record the audio output back to the host computer.
And yes, you can just use an external computer as a stand alone synth, just feed the MIDI to it from the host computer, and record the audio output back to the host computer.
dude I don't know where you've been looking but a second hand polysix on it's OWN cost more than this softsynth! If I could get a new powerful Mac Pro, I would...but at most I can afford a decent Macbook.
I asked the guy at my local guitar center, who was apparently one of the more knowledgeable guys on staff when it came to this type of stuff..and he said I'd be better off upgrading my ram to it's max, 1.5 GB, instead of trying to run the KLC on a laptop and triggering it from the pro tools session on my main workstation, which is the G4.
He seemed pretty confident that if I upgraded my ram to the max I'd be able to run this VST on my computer if it was the only VST I ran in a pro tools session..of course it'll be slow..but at least I'll be able to run it and use the sounds he said. What do you guys think? A quick response would be helpful because I just purched the KLC analog edition today and want to purchase the 3 512mb slots of ram tonight if that is indeed the better option.
I asked the guy at my local guitar center, who was apparently one of the more knowledgeable guys on staff when it came to this type of stuff..and he said I'd be better off upgrading my ram to it's max, 1.5 GB, instead of trying to run the KLC on a laptop and triggering it from the pro tools session on my main workstation, which is the G4.
He seemed pretty confident that if I upgraded my ram to the max I'd be able to run this VST on my computer if it was the only VST I ran in a pro tools session..of course it'll be slow..but at least I'll be able to run it and use the sounds he said. What do you guys think? A quick response would be helpful because I just purched the KLC analog edition today and want to purchase the 3 512mb slots of ram tonight if that is indeed the better option.
Which I believe was exactly my point.tr999 wrote:dude I don't know where you've been looking but a second hand polysix on it's OWN cost more than this softsynth!
Yes, a G4 will run the Legacy, but the amount of ram you have is pitiful - barely enough for the OS, let alone audio software on top of that, and plugins within that audio software. Are you running OSX?tr999 wrote:I asked the guy at my local guitar center, who was apparently one of the more knowledgeable guys on staff when it came to this type of stuff..and he said I'd be better off upgrading my ram to it's max, 1.5 GB, instead of trying to run the KLC on a laptop and triggering it from the pro tools session on my main workstation, which is the G4.
A current Macbook will run this stuff comfortably well.
oh shoot sorry I completely misread what you wrote...smh at me. But yeah I know...it's pitiful that I'm using a G4 but I got an incredible deal on it with a digi001 rack hardware and a bunch of softsynths included I'd be stupid to turn it down. So the most I could do right now is to max out the ram...and you said the G4 will run the legacy, so my best option now would be just to upgrade to 1.5 gb of ram correct? I'll eventually get a macbook so if anything I'll eventually link it to my G4. And yes I'm running Mac OS.X 10.3.9
Before I got a Mac Pro, I was trying to use KLC on a G4 dual 800 with 1.25 GB of RAM. When using the Legacy Cell as an insert in DP5.13, I was able to play TWO notes of the first factory preset, Vaporization Pad. Any more than that led to the sound breaking up horribly because the CPU couldn't cope. And there were some presets that the Mac couldn't play at all, not even ONE note.
Unfortunately, KLC requires a draught horse, not a Shetland pony.
Kind regards.
Unfortunately, KLC requires a draught horse, not a Shetland pony.
Kind regards.
Dave Bourke
- ideation -
- ideation -
^ that was legacy cell though, what about when trying to play preset sounds from the ms-20 and polysix? that would be good enough for me for the time being...I'm waiting on my 1.5 gb of ram upgrade..hopefully that will help.
What about if I just try to run everything off the Macbook when I end up getting it? Would I have to purchase an Mbox? (using Digi001rack currently) and would I have to downgrade the O.S. on the macbook to 10.3.9?
What about if I just try to run everything off the Macbook when I end up getting it? Would I have to purchase an Mbox? (using Digi001rack currently) and would I have to downgrade the O.S. on the macbook to 10.3.9?
Both the MS-20 and the Polysix will be less taxing on your G4's CPU. Nevertheless, you're gonna be doing a lot of track freezing simply because the machine doesn't really have the grunt necessary.
If you intend to buy a new MacBook, then that machine WILL have plenty of power. However, I'm unable to advise you on suitable audio interfaces because I've always used desktops with PCI-based interfaces (MOTU).
Incidentally, I very much doubt that a MacBook will run 10.3.9. New Apple machines these days won't even install older versions of the OS than the one they come with out of the box.
Kind regards.
If you intend to buy a new MacBook, then that machine WILL have plenty of power. However, I'm unable to advise you on suitable audio interfaces because I've always used desktops with PCI-based interfaces (MOTU).
Incidentally, I very much doubt that a MacBook will run 10.3.9. New Apple machines these days won't even install older versions of the OS than the one they come with out of the box.
Kind regards.
Dave Bourke
- ideation -
- ideation -