2.1 editor on OS X 10.9

BobTheDog · Post by **BobTheDog** » Mon Nov 11, 2013 11:33 am

Hi Guys,

Does anyone have this working, I just get loads of Disk Access Errors.

Cheers

Andy

Jürgen · Post by **Jürgen** » Mon Nov 11, 2013 12:45 pm

I have a mac book with mavericks and it work with kronos and Editor!!
No problems!!
See on you tube
https://www.youtube.com/watch?v=ML13d_- ... ata_player

Lou · Post by **Lou** » Mon Nov 11, 2013 2:57 pm

Initially I did the first full transfer and saved the set. Why does the editor always open in Global/Basic (Stand Alone) Also when I'm in a DAW (Live 32bit.) and open the set it does the same. I've been reading the manual but cannot find a way for it to load directly to a patch. I must be missing something along the way or is this normal? (OS 10.9 Mavericks)

Oldretro · Post by **Oldretro** » Mon Nov 11, 2013 6:19 pm

BobTheDog wrote:Hi Guys,

Does anyone have this working, I just get loads of Disk Access Errors.

Cheers

Andy

And, how is the new version of he editor? Is it a complete new design, or is it an updated/improved version of the Soundquest editor?

Lou · Post by **Lou** » Mon Nov 11, 2013 6:22 pm

Updated, same interface, but it seems to run a little smoother…

Oldretro · Post by **Oldretro** » Mon Nov 11, 2013 6:31 pm

Lou wrote:Updated, same interface, but it seems to run a little smoother…

Ok, thanks for the info! I might give it a try in a while (studio pc is not functioning properly at the moment).

Banquet · Post by **Banquet** » Mon Nov 11, 2013 8:26 pm

I'm getting loads of errors too. Something about not being able to find directories. If you hold return it tries to load after about 100 errors, and then crashes.

I've tried it multiple times, after re-boots, etc - same each time

BobTheDog · Post by **BobTheDog** » Mon Nov 11, 2013 9:29 pm

So it works for some and not for others, i will email Korg about it......

zardoz · Post by **zardoz** » Mon Nov 11, 2013 9:37 pm

Make sure you are running editor 2.1 not the old one in your task bar .

Lou · Post by **Lou** » Mon Nov 11, 2013 11:54 pm

I don't know if this has anything to do with it but please check your documents folder and make sure there is a folder there named Soundquest. Initially I had deleted that folder and all things related thinking to do a clean fresh install. To my surprise the soundquest folder was not re-created after installing and I also had the errors you are mentioning. I replaced that folder from a Time Machine backup. It then opened without errors are and allowed me to do the transfer. The 2.1 installation does not overwrite 2.0 so you are left with two editors. As the post above says, make sure you drag the correct icon from 2.1 folder into your taskbar.

BobTheDog · Post by **BobTheDog** » Tue Nov 12, 2013 6:52 am

zardoz wrote:Make sure you are running editor 2.1 not the old one in your task bar .

Thanks that was the problem.

So the 2.1 install messes up the 2.0 installation but doesn't replace it, quality!

Korg Forums

2.1 editor on OS X 10.9

2.1 editor on OS X 10.9

Re: 2.1 editor on OS X 10.9