Sound Card and Software for Midi Sequencing

Discussion relating to the Korg Pa600 and Pa300 Arranger.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
User avatar
darrylkorg
Posts: 33
Joined: Sat Jul 20, 2013 7:36 pm

Sound Card and Software for Midi Sequencing

Post by darrylkorg »

Dear All,

I bought a Pa 600 few months ago and i had to say i ve been having great time and fun playing with the instrument and there are too many things to explore. Have been using the song sequencer mode extensively all this while.

I am now thinking to explore the midi sequencing. So thought of taking some inputs / suggestions.

1. Which Software would be ideal for rookies like me.
2. what things should i buy to get my KB connected to my PC for a basic sequencing.
3. If there are any materials to go through and learn.

Your inputs will surely be helpful to my start with this exciting hobby. I have no intentions to take it professionally. I know i cant :lol: ... So request your suggestions.

Awaiting your responses.

Thanks,
Darryl
wittid
Platinum Member
Posts: 821
Joined: Tue May 02, 2006 1:13 pm
Location: Germany
Contact:

Post by wittid »

Hi,

you doesn´t need a soundcard for midi.

You can buy an USB-Midi Interface - it´s cheap and good.
I´m Using the Midifile Optimizer software and it´s very easy to handle with good results.

For the PA600 i use the setting og the PA800.
so far from my side
Detlef

P.S. i think you can download a demo of the software to test it.
User avatar
Bald Eagle
Platinum Member
Posts: 2278
Joined: Sun Jan 25, 2009 12:06 am
Location: Long Island, NY

Post by Bald Eagle »

You can connect the PA600 to your computer using a standard USB type B connector for the MIDI interface. You also have to install the Korg USB MIDI driver. Note that this is only for MIDI and no audio is transmitted.

You may also want to consider an audio interface to get the audio into your computer for recording and editing. You don't need it to get started with MIDI sequencing but you will probably want to get one at some point. There a a lot of decent 2 channel interfaces that are inexpensive. Focusrite has a good one.

I use Sonar X3 for my DAW. You could get the entry version and upgrade to other versions as your needs grow. There are other good ones too but do some research and be sure there is an upgrade path when you find you need more.

Here's a link with lots of information that should be very helpful.

http://tweakheadz.com/guide-to-home-and ... c-studios/
User avatar
darrylkorg
Posts: 33
Joined: Sat Jul 20, 2013 7:36 pm

Post by darrylkorg »

You may also want to consider an audio interface to get the audio into your computer for recording and editing.

Hi,

Thanks for your inputs....

If you culd let me know the difference between Midi interface and audio interface it would be helpful.

Is that the audio interface is required to record voices and other instruments?

Regards,
Darryl
User avatar
Bald Eagle
Platinum Member
Posts: 2278
Joined: Sun Jan 25, 2009 12:06 am
Location: Long Island, NY

Post by Bald Eagle »

The simple answer to your question is yes, the audio interface is needed to record instruments and voices.

MIDI is just data that tells a synth what notes to play as well as other control information, there is no audio contained in a MIDI sequence. A MIDI interface transmits this data between devices such as a keyboard and a computer.

The audio interface transmits the actual sound that is played between devices. It usually takes care of converting a signal from analog to digital or digital to analog as needed.

So for example, a computer plays a MIDI sequence and sends the data to a MIDI interface which in turn sends the data to a PA600. The PA600 plays the notes and the signal is sent to its audio output. Connect the PA600 audio output to an audio interface which will convert it to digital and send it back to the computer over USB or FireWire where it can then be recorded by a DAW.

Some interfaces have both MIDI and audio connections in the same device.
User avatar
darrylkorg
Posts: 33
Joined: Sat Jul 20, 2013 7:36 pm

Post by darrylkorg »

Thank you very much for the clarifications.

I have shortlisted the below based on my budget. Please suggest the good ones for beginners.

Focusrite Scarlett 2i2 USB 2.0
Focusrite Saffire 6
M-Audio M-Track Two Channel Portable USB Audio/MIDI Interface
Roland UA-22 DUO-CAPTURE EX USB Interface

Thanks a lot.

Regards,
Darryl
User avatar
Bald Eagle
Platinum Member
Posts: 2278
Joined: Sun Jan 25, 2009 12:06 am
Location: Long Island, NY

Post by Bald Eagle »

I would go with either the Focusrite 2i2 or the Roland UA-22. Both are good quality 2 channel interfaces.

The Roland has a few extra features including Sonar LE so that might be the better choice for you. It gives you everything you need to get started and you can always upgrade to other Sonar versions later if you like it.

I think the Roland also has better integration with the iPad if you are ever going to use that. The Focusrite has no MIDI support so no way to get MIDI into the iPad. The Roland has MIDI DIN connectors for that.

I think the Focusrite comes with Ableton Lite for your DAW and it is a little less expensive. But personally I like Sonar.
Post Reply

Return to “Korg Pa600/Pa300”